Landspeeder Luke

Vader's Operating Table

This was one of the most requested dioramas and it took me a few weeks to figure out the articulation and the structure (prints with no supports!) Enjoy! 

Imperial Infinity Box

A troop builder's dream. This box uses two 8" mirrors  and creates an infinite troop effect. 

Can also be used without the mirrors for toy photography.

Prints on Ender 3 Pro.

Lars Homestead

I've been wanting to make this for awhile but couldn't figure out the right way to "cut" the building properly for a shelf display. I finally settled on a shape that's instantly recognizable but also fits on an Ender 3.

To paint the inner door frame, I just lay the main piece face-down on a table and sprayed it with paint so it only hit th...

Quick-Hang Figure Displays

I've seen a lot of posts of people's collections and shelves so I designed a minimalistic wall stand to showcase your figures. Mix and match the patterns however you like!

And yes these photos are totally my house and definitely not stock photos.

I recommend scaling up to 110% if your printer can fit it!

Palpatine's Office

This week's file is Palpatine's Office from the prequels!

Two versions available, one for 220mm printers and a slightly taller/longer one.

The file is split down the middle but everything can be mirrored to create the full width.

The chairs print in two pieces and are assembled similarly to the Death Star cameras, just paint an...

Rogue One: Jedha City Diorama

In anticipation of the Rogue One figures re-releasing soon, I present the Jedha City diorama set.

Leia Prison Cell and Death Star Camera

In preparation for the release of the new Princess Leia, here is Leia's prison cell!

The security cameras are super easy to print/paint and will go well with your GTP  Spacewalls or other Death Star dioramas.

There is also an XL version of the diorama that has longer walls/floors.

Prints on Ender 3 with no supports.

...

The Door

Also includes files for smaller printers.

Rogue One Prison Door

A simple door I sketched while watching Rogue One last night, the prison door that traps Cassian, Chirrut and Baze. Could be nice to have on the shelf when we finally get our Bodhi Rook figures.

FYI This is just a bonus post for this week!

The Elevator

Yes, that one.

This prints as one single piece, no supports, no glue, no paint!

Printed on Ender 3 Pro. Make sure you disable supports, you may have a little stringing around the inside of the circle hole but it doesn't show when viewed from the front.

I used a white mailing label to cover the holes in the back with wh...

Darth Vader Helmet Stand

Today someone requested the stand from the sequel trilogy for the Darth Vader helmet that comes with the Kylo SDCC set. Hope you enjoy!

Seller Tiers - Guidelines and Rules

If you are unable to secure one of the spots please message me for waitlist information.

Seller Tier Rules

Last update: Nov 7, 2022

Subscription to the seller tier and sales of physical prints using the STL files are subject to the following terms, any updates to the rules will have a 30-day 'heads-u...

The Ghost - Rebels Cockpit Door and Crates

Karabast! This week's post comes very early.

The door is super easy to paint since it's split into 3 layers. I used a silver sharpie for the yellow accents before painting over with yellow to make it pop a little more.

I played with the sizing in my slicer for the second crate.

The ladder is a repeat from an older dior...

Mustafar Platform

Prints with no supports!

Just in time for your ROTS Obi-Wan Kenobi Archive figures!

I coated this with a metallic copper paint and then used brown and black over top.

This fits on an Ender 3 Pro.

Shoretrooper Tray / TC-14 Tray

Both of these trays are now available.

TC-14 is a custom using a C-3PO base and airbrushing Vallejo Air Chrome with a Liquitex gloss coat spray over top.

Build-a-Bespin Modular Playset

This weeks file comes early!

Modular walls and dioramas are frequently requested, and so is Cloud City.

I used the same acrylic panels from the Hoth Table to make the windows....

Death Star Control Room

This is one of my favorite dioramas I've ever made, I think I'll actually keep this one! I was so excited to see it pop up in Episode 14 of The Bad Batch too!

This will print on an Ender 3 Pro or bigger.

I printed the screen labels on sticker paper at 100%.

Welcome to LandspeederLuke's Patreon!

Hello and welcome to my Patreon where I share Star Wars 1/12 scale STL files for 3D Printers. Here are some of the files that are currently available to download at every tier. There's more where that came from!

Most of these files are separated to print on smaller FDM printers like the 2021-08-06 01:33:02 +0000 UTC View Post

Falcon Exterior

I'm still traveling (getting home tomorrow!) So this is one of the last of my older files that I haven't shared yet, this thing is HUGE, and should keep your printers busy for awhile.

I used 3M command strips hooks to hold this up on my shelf corner.

As I mentioned last ...

Han in Carbonite Micro Diorama

I wanted to make sure that those with smaller printers didn't miss out on any printing this week!

This micro diorama prints on the Ender 3 Pro (210mm tall) and has been split up for very easy printing and painting.

I recommend using a 3M command strip to attach Han to the wall.

You can optionally set the back and floor pieces t...

Geonosis Battle

2024 UPDATE: I've split the column into two pieces and enlarged it so it's 14" tall when printed. New file (SplitColumn.zip) attached below. This was one of my very first files years ago and I will likely redesign this dio someday for smaller printers.

Happy Sunday!

This is one of my first files, and the first time I used ...

Thank you.

I just had an upsetting experience this afternoon of finding an Etsy page with a handful of my files listed for sale for $12+ each, and apparently multiple sales had been made of each file. The page had been up for over a week.

I contacted the seller and he immediately took down the listings, claiming that someone on CGTrader had sold him ...

Rogue One Stormtrooper Doll 1/12

Quick little design I made yesterday of Jyn's doll. Specially designed for filament printers. Set your print speed to 20-30mm for this for best results.

LAAT Republic Gunship Display

Came up with this little design at dinner last night and got it printing overnight (perks of having 3 printers). It took over an hour for me to figure out how to split this to print without supports. Painted it up this morning and couldn't wait to share!

Storage Room / Weapons Rack

This week's file is a modular weapons storage area for all those extra accessories you have. You can mix and match the files and expand this as your collection expands, or you can use the included floor piece to create a corner room.

Paint it all light gray with a glossy black floor for an Imperial aesthetic, or use a 12"x12" black acrylic...

Bespin Duel

Here is this week's diorama, representing possibly the most famous scene in cinema history.

To utilize the 'breakaway' feature, you'll need these magnets.

I also used one of these acrylic tables to keep it f...

Hoth Computer Station

PRINTING GUIDE:

You'll need these 2021-06-27 00:14:18 +0000 UTC View Post

Tech Glasses and Datapad

The glasses are resin printed (I used a clear resin with a bit of yellow resin mixed in. The back of the headband needs to be clipped to fit, but will give the snuggest grip without snapping. These look bigger in the photo than they do in re...

Bad Batch Chairs and Gonky

2021-06-18 18:57:30 +0000 UTC View Post

Jabba's Palace

This is a big one today! My Jabba's Palace diorama as well as ...