Landspeeder Luke

Andor Riot Shields and Batons

UPDATE: Added a baton to the .zip file.

Print these with supports off, no paint needed with black filament.

I used parts of a Black Series plastic window and just superglued them onto the back.

For the baton you may need to use a brim or raft to prevent it from toppling over while printing.

Tantive IV

Finally a 1/12 Tantive IV hallway is available!

Can't wait to see your builds.

I've linked my two favorite filaments for this project.

White:https://amzn.to/3Tmtk2m

Gray: https://amzn.to/3...

Sacred Jedi Texts

In collaboration with Fulcrum Designs I'm happy to present another entry in my resin Jedi series. 

Thanks to Failed_Imagineers for printing, Johnny for painting, and <...

Meditation Stone

Now that we all have our Dark Troopers we need our Jedi Meditation Stone.

This is hollow and printed in 14 hours at .12 layer height.

This is the beige filament I used (no painting).

This Grogu is from the Arvala-7 two-pack.

Thank you to Fulcrum De...

Venator Column

I know that shelf space is limited as a collector, so I wanted to make a very quick and easy print to flesh out some areas of your shelves with a minimal footprint. This hallway column prints in 4-5 hours and requires no paint.

Filmanet used:
Space Gray
2022-10-05 16:14:29 +0000 UTC View Post

Count Dooku Bust

Straight from the archives of the Jedi Temple is the Count Dooku bust from Attack of the Clones.

Resin printed bust with marble PLA printed base.

For the bust, paint it dark very brown, do gold dry-brushing, and then a green wash for that patina/bronze look.

Obi-Wa...

Ferrix City

Get ready for your Andor figures with this Ferrix diorama! 

All pieces designed to fit on an Ender 3 Pro.

Jedi Comlink

Remember scanning those com-tech chips back in 1999? Now your Black Series figures can have the same experience :)

Print in resin, paint black, and do a metallic dry brushing to pick up the detail. Way easier to paint than it looks! I did the gold details with a gold Sharpie.

Ackbar Baton

Adding to the growing collection of resin prints is this baton like the one we see with the convention exclusive Admiral Ackbar. Enjoy!

Cantina Bar

Finally tackling this again after a couple years, this one is super easy to print and requires no paint or supports. 

Please check out my YouTube channel for an assembly video.

Beige PLA: 2022-09-14 22:07:57 +0000 UTC View Post

T-16 Skyhopper

I'm excited to start a new resin focused section of my Patreon in addition to the filament prints. First up is a T-16 Skyhopper toy like the one we see in Kenobi.

Printed at 100% scale should fit perfectly into most Black Series hands.

Rogue One Finale Catwalk

This can hang off the edge of your shelf if you use the bottom brackets, though you may need some command strips to hold down the back end.

Can print paint-free other than a few details on the computer.

I used this filament to test print.

2022-09-05 19:34:29 +0000 UTC View Post

Trash Compactor

If you bought some brown filament from my Ewok Village you can use that to create another paint-free diorama!

All of the "trash" pieces are recent failed prints from my printer, though you can stuff this with whatever you want! Tons of the random smaller pieces from older dior...

Tatooine Facades C&D

A continuation of the facades I posted a few months ago, these are designed to print on larger printers but have a ton of smaller pieces if you'd like to decorate your other printed dioramas or foam builds.

Prison Ship

Now that we've got some more figures out from this episode I finally tackled the prison ship door. No paint required when using the following filaments:

White: https://amzn.to/3damQ7l

Black: https://amzn.to/3Qum...

Tree-top Village

It's finally here! Just in time for the ROTJ 40th. Designed to print support free on an Ender 3 or similar sized (200mm).

The unioned rope pieces are for those with larger printers.

Filament used:

https://amzn.to/3Q7eZWg

2022-08-01 15:05:16 +0000 UTC View Post

Modular Cave

This cave diorama can be mirrored and extended, and the columns and rocks can be moved to fit your display/photograph needs.

Prints with no supports on an Ender 3 Pro or similar, largest edge is 185mm (D) x 185 (W) x 215mm (H).

B2EMO

Just revealed today by Hasbro, B2EMO is the newest droid companion from the Disney+ series Andor. Now you can have him at home today!

Added a separate bottom pieces for resin printers that has the feet attached to the body so you don't need the bracket on the bottom. 

Cantina Bandstand

"If you have any requests, shout them out!"

"Play that same song!"

"Alright, same song, here we go!"  

Dark Trooper Hub

When I saw the TVC Dark Trooper deluxe I knew I had to make something similar for Black Series. Now that I have the Dark Trooper in hand, I was able to finish it up.

I used pieces of these red gel ...

RotS Elevator

"R2 we need to be going up, not down!"

This prints on an Ender 3 Pro with no supports. 

I like this white filament for the light features and this space gray for the elevator itself. I airbrushed on thi...

Rocks!

As soon as I watched the episode I knew I had to get these started for you guys! Includes split versions for smaller printers.

I used lightning infill at 10% on these and each one printed in less than 12 hours.

Some great terrain painting tutorials:

2022-06-26 02:06:10 +0000 UTC View Post

Mapuzo Outpost

By splitting these pieces up this base can print without supports while also fitting on an Ender 3 Pro. Enjoy!

Clone Memorial

One of the most memorable parts of Jedi: Fallen Order were these clone memorials. If you don't have enough clone helmets, there are some on Thingiverse.

Split to fit on smaller printers. Prints support free!

I highly recommend playing with lighting infill as well as adaptive layer height so your top printed layers (...

Fortress Doorway

A simple backdrop for your upcoming Inquisitor figures. Sliding doors and easy print
"lights". No paint and no supports needed! 

Mirror the door in your slicer for the right side.

Smaller printer option included below.

The filament I used is called "Sp...

Milennium Falcon Doorway

This took me about two years to figure out, but this doorway prints in just two pieces with no supports. A perfect centerpiece for any collection.

At 6" scale, this one sits at 285mm wide which requires a larger printer.

Duel of the Fates Finale

This was often requested but I couldn't find a good way to make that back wall piece without requiring difficult white paint applications, decided to use printed white panels as the lights. I used this white filament that's the brightest white I've found. This can be completed witho...

Shelf Corners

Here are some quick and easy ways to enhance your shelf displays. I used these command strips to attach them to the top shelves. Try using "lightning infill" so they're lightweight and quick to print. Please send me pics of your displays if you decide to use them, or if you have any...

Mos Pelgo Cantina - Two Sided Diorama

With working doors! Prints completely support free. Utilize the mirror feature in your slicer for the doors. Print two of each and sandwich them together so both sides have detail.

The Rancor

Since the failed Haslab campaign I have being trying to figure out how to make a Rancor in Black Series scale, while still keeping it reasonably sized. Thanks to Fulcrum Designs for helping me realize my idea! 

Prints mostly without supports and can be printed on an Ender 3.

The bone Luke is holding was found here and printed at...