Landspeeder Luke

Tattooine Street Facades

These require a larger printer as I didn't initially design them for the Patreon, but enough of you asked about them that I figured I'd share anyway. The first two of a big set of street facades that I'll be sharing over time.

Death Star Ruins

Some versatile pieces to build out any scene. Separated into 8 segments of 5"x5". Mix and match to build out hallways, backdrops, and floors. Can't wait to see what y'all do! 

Ahsoka Lantern and Grogu Rock

Couple of simple pieces I made for myself and wanted to share with y'all. I printed the glass insert with clear filament with "spiralize outer contour" enabled (aka "vase mode").

Turn off all supports! Had no issue printing at 60mm speed without supports. 

I painted the lantern with gold paint and sprayed it wit...

Flight Stands

I was never a big fan of those plastic jointed flight stands, the joints were too weak and the balance was always tricky. I wanted to make something that blended in a bit more and created a better illusion of movement. These should be great for shelf displays and toy photography alike!

You may need to experiment with the size of the clips ...

Jabba's Dais / Throne / Platform

It was brought to my attention that the original free file that I had linked for Jabba's Dais/Throne had been deleted, so I made my own. This should still be compatible with the previous Jabba's Palace files. This measures just under 15" when printed.

I recommend trying 10% lightning infill with only 2 bottom layers to speed up print time....

Anakin's Speeder

I'm so excited to present another collaboration with @Inprintcondition  on the #1 requested vehicle. This thing is massive, measuring 21" when completed.

This is a major print, and should keep your printer busy for about a week. Carefully separate...

Cantina Set

Happy to bring you another highly requested set. 

Print the benches on their wider side and print the end cap separately to avoid having to use supports.

Feel free to expand the X and Y axis of the table to make it a little larger while keeping the same height.

AT-ST Head Centerpiece

Since a 1/12 scale AT-ST would be impractical for most collections, I tried to simplify this iconic moment as much as possible.

Please be sure to utilize the "lay flat" feature in Cura to make sure the flat parts of each piece are aligned with the bed.

Junk Shop

Since my last accessory display was so popular I decided to make another! This one with a more desert city vibe. Part Galaxy's Edge, and part Watto's Shop. Can't wait to see what you do with it! 

Jedi Temple Stairs

Execute Order 66

Feel free to expand the stairs as wide as you want in your slicer, or print multiples to extend the display. I would also measure your shelf height and scale the Jedi statue bases to fit. 

Try “vase mode” in Cura for the statues.

Bad Batch Training Barricade

Taken straight from the pilot, this Bad Batch training barricade comes in one piece, and split down the middle for smaller printers.

The Client's Office

3D printing is a complicated profession...

Boba's Palace Mini-Diorama

This is a simple little diorama for those looking to add a little ambience to their collection. Turn off all supports when printing.

Upgraded N1 - by @inprintcondition

I commissioned this piece from InPrintCondition and I'm so happy with the results.

PLEASE NOTE: Theae files are not included as part of the seller tier as they were made by another artist and I cannot grant that permission. Please contact @inprintc...

Bamboo Mini-terrain

Little bonus file this week, inspired by Boba Ep 6 I wanted to try making some bamboo.

Play with the height and size in your slicer to mix them up a bit. 

To paint, do a base coat of green and take a white/beige and just drag your brush upwards from each 'joint'. The layer lines will create a natural bamboo texture. So easy!

Hexagon Risers and Stands - Display Solution

Dec 2023 Update: The normal foot stand has been updated to have a stronger clip for the foot so it is less likely to break. Important change for the sellers who sell physical prints.

Nov 2023: Updated with some newer stands, a new storage tower for the stands, as well as character specific stands such as Han in Carbonite, and a riser arran...

Darksaber Catwalk

Inspired by the latest episode of Boba, this catwalk scene jumped right out as a necessary diorama!

The files are divided to allow for different printer sizes as well as versatile display options. You should be able to use lots of these pieces to expand your existing dioramas as well! I recommend printing the vent, the 1/4 floor wedge, and...

Thumbnail Gallery

https://www.landspeederluke.com/stlfiles

Hey everyone! This was a much requested feature, and I'm excited to release this thumbnail gallery that directly links you to each post. No more endless scrolling through Patreon's terrible timeline format.

I'm al...

Defense Barricade

A versatile addition to your collection, works with any era and any faction.

These interconnect with each other so you can extend the setup as long as you want.

Make sure to turn off supports when printing!

Hangar Escape

Straight from Episode 4 of Book of Boba Fett. Believe it or not this prints on an Ender 3. If you lay the beams diagonally on the print bed, you can get an extra 4cm of print length. Make sure to turn off all supports.

The cross beam sits on the columns and is quickly removable for easy storage.

The floor wire piece can be extended a...

Gaffi Building Station

The gaffi building station caught my eye in the latest BOBF episode. So cool to realize it was drafted from concept art from the 70s! The left piece has a hidden base in the back so it can stick to the print bed and stand up. I painted the base a dark brown and used a sponge  w...

Tosche Station

This week's diorama is Tosche Station from Book of Boba Fett (probably next week's episode) and the original trilogy deleted scene. 

All props are included in the download. I glued the objects in the shelves to small square plates (included STL) so the...

Yoda's Hut

UPDATE: Feb 20 2024 - A lot of people were having issues printing the main hut file using Bambu slicer but the file has been updated and should work now!

I tried printing this with and without supports, and either way I had issues with the ceiling inside the hut. I recommend printing without supports, ideally the problem a...

Mandalorian Finale Table

I launched this page earlier this year and your support has totally exceeded my expectations. It's hard to describe the feeling of designing something on your couch and a few days later seeing it in someone's hands across the world. I love reading your suggestions and learning what makes you happy. You all make this possible and I feel so lucky ...

Forward Command Center

“To the Forward Command Center, take me”

This was a popular request for those who grew up watching Clone Wars and playing Battlefront. This is a massive set and should keep your printers busy for awhile!

Terrain Corner

UPDATE: Special thanks to Jacob for helping me with an error in the original file that was shared. If you downloaded this already please download the updated file below, thanks!

I wanted to design risers that could be versati...

The Finale

Now that we're getting our final figure from this scene (Fennec) I thought it was time to tackle the Mandalorian S2 finale! 

This room was tricky because it was so large, finding a way to showcase the window and the stairs without taking up too much space on your shelf. I had also been struggling to find a way to make the curved windo...

Nesting Crates

I designed this set with toy photographers in mind who need to set-up and break down their dioramas.

All 23 pieces pictured nest down into a 4.25" wide box.

Have fun! If you guys enjoy this I may expand on this set in the future. 

Yavin Ceremony

Just in time for the Ceremony Leia's to arrive, this simple design finally gives a place on your shelf for that Yavin Luke (pictured here with a Figuarts head).

Available pre-textured or flat in case you plan to add texture/foliage yourself.

You can also stretch the width of the stairs and add extra columns if you'd like to fit extra...

Death Star Door

Thanks to a suggestion from Instagram friend Eric I made these Death Star doors from the famous rope-swing scene.

Seen here printed at 100% on an Ender 5 Plus, but can be scaled down on an Ender 3 or similar.

Shown here with gray filament, no paint, no g...