New Squid Game Vunks for January Patrons!
Added 2025-01-09 16:26:07 +0000 UTCThese characters will be available to January patrons and have been added to the January drive link ! Please let me know if you haven't received a link for the January drive folder !
Thank you for all the positive feedback on the minis ! Id love to see any prints you do of them and I have a lot of ideas for future minis now !
This collection includes:
- Young Hee Doll
- Triangle Soldier
- Circle Soldier
- Square Soldier
- Front Man
Each character includes a Flexi, Figure and KeyChain, all of which are Colored !
Everything is saved as 3MF and STL !
Lots more to come this month ! Please stay tuned :D
Comments
Will you be creating player 456 at anytime. Or if you have already and I missed it will it be on cults3D ( tried looking )
Shelley's World, Island Life
2025-07-21 08:40:00 +0000 UTCWelp, pretty much instantly failed. Failed hard enough that the spaghetti detection on the X1C caught it and alerted me lol. Maybe I’ll just stick with the original
DomesticWarlord
2025-01-13 03:00:23 +0000 UTCSending it to the printer now. I'll let you know how it goes in the morning
DomesticWarlord
2025-01-13 01:27:27 +0000 UTCOk updated that file now if you want to try it again :)
j0e
2025-01-13 01:16:51 +0000 UTCPew, glad it wasn't just me screwing up something lol
DomesticWarlord
2025-01-11 15:59:40 +0000 UTCHeya your right its definitely something wrong with the edited version, I think I have an idea on what it could be so hang tight and Ill get him updated for you this evening! Sorry the edited version has been such a headache for you
j0e
2025-01-11 11:04:06 +0000 UTCI know this doesn’t make any sense, but I’m running out of ideas at this point. Is there anything you might have changed in this new file that might cause it not to adhere properly to the bed? I printed the original files just fine on my A1 with the PEI plate, Bambu basic blue gray PLA and basic black. They printed just fine without any issue (except my botched hole attempt.) When you posted the new file I sent that new file to the same printer with the same plate and filament, it came off the plate within the first 10 layers. I took it off, cleaned it at my kitchen sink and tried again. Another failure. By this point my X1C was done printing its project so I moved the same two filaments over to that printer, also using a PEI plate, resliced for the new printer and tried. Quick failure again. I have one of the new super tack plates from Bambu so I thought I’d try that. Resliced. Failure. Cleaned that plate. Failure. Tried one of my smooth textured plates. Failure. Washed all the plates again. Again, failure. I took the filament and put it in my dryer for four hours to let it dry just in case that was issue. Failure. At this point I don’t know what to do. I’ve taken every plate I own to the kitchen and scrubbed and soaked them in hot water with dawn soap. They’re sitting on the drying rack and I’ll try again in the morning. I know adhesion issues are usually dirty plates but I can’t imagine how every plate I own is so dirty that it keeps failing, even after washing. Do you have any ideas?
DomesticWarlord
2025-01-11 03:43:47 +0000 UTCIt’s printing now! Thank you
DomesticWarlord
2025-01-10 14:06:16 +0000 UTCAdded it now ! Its the file called FlexiKeyChain in the name, thanks :)
j0e
2025-01-10 13:15:54 +0000 UTCMerci beaucoup Gégé !
j0e
2025-01-10 11:13:41 +0000 UTCah oui excellent <3
Gege
2025-01-10 10:52:38 +0000 UTCThat’s so sweet ! I’ll send you a message once I’ve added it :)
j0e
2025-01-10 09:39:24 +0000 UTCThank you! I’m mostly interested in having Front Man done for now. My daughter wants him to go on her backpack lol.
DomesticWarlord
2025-01-10 09:38:11 +0000 UTCYou’re welcome !! :D
j0e
2025-01-10 09:33:52 +0000 UTCHeya ! I’m not sure if I can do this for every character in future due to storage spaces but if you let me know what characters you’d need this for and I can do that, would you need this full set ?
j0e
2025-01-10 09:33:40 +0000 UTCWould it be possible to add an option for the flexi with a keychain holder? I tried just adding a negative space in the head but it doesn’t look nearly as clean as your keychain ring does.
DomesticWarlord
2025-01-10 04:55:35 +0000 UTCOMG YESSSSS thnakyou
Dorinda C
2025-01-10 04:06:42 +0000 UTCI was thinking of something like this ! Absolutely I’ll try and get something like that working :)
j0e
2025-01-10 03:26:28 +0000 UTCAbsolutely I’ll try and get them made as soon as I can :))
j0e
2025-01-10 03:26:02 +0000 UTCThank you !
j0e
2025-01-10 03:25:40 +0000 UTCThat would be so great to have them as a standing articulated mini....
Anomis
2025-01-10 02:24:15 +0000 UTCCould we get a coffin box, like the one from the show? Black with the pink bow? We could use it as a stand/storage for these.
Anomis
2025-01-10 02:19:10 +0000 UTCThese would be great as a mini that could stand on it's own
MamaBear
2025-01-09 22:56:00 +0000 UTCHaha funny
Andi Patsky
2025-01-09 20:11:02 +0000 UTCLove it!
Laurel Mc
2025-01-09 19:09:05 +0000 UTCThank you !! I really enjoyed season 2 as well !
j0e
2025-01-09 16:40:47 +0000 UTCJust watched season 2 , these are Awesome!!
3DefyPrinting
2025-01-09 16:37:07 +0000 UTCYeesssssss!!!!!
Marta Torres
2025-01-09 16:26:45 +0000 UTC
