I'm excited to release this complete revamp of my previous Jabba's Palace diorama that's finally Ender 3 friendly and has a lot of texture and detail baked right in. I recommend this light brown filament. Prints with no supports and shown here with no paint! 21 accessories included....
2023-06-01 14:37:43 +0000 UTC View Post
I am happy to bring these files by Rebel Base Build to my Patreon, thanks James for allowing me to make them available here. Please check out his Instagram and Patreon as well!
Tho...
2023-05-20 18:47:57 +0000 UTC View Post
Due to incessant demand I'm happy to present Turgle from Jedi: Survivor as sculpted by @TheGlowingGhost
2023-05-13 15:43:16 +0000 UTC View Post
Just a quick and simple addition to your Endor shelf! Your print bed height is probably way taller than the width, so see how far you can push it. This stretches nicely in any direction to fit whatever shelf you have. The screenshot shows the settings I used for the log for Leia.
Print tips: I did 2 bottom layers, with .28 layer height (0%...
2023-05-07 20:16:09 +0000 UTC View Post
Another Collab with @TheGlowingGhost for a new cantina alien. I've wanted this guy in the collection for so long but didn't want to use soft goods. Also available as an unhooded head sculpt for those who prefer the cloth cape. Death Squad body used with no modifications (other than removing head).
2023-05-07 19:09:44 +0000 UTC View Post
It's been over two years since I posted my V2 of the Endor Bunker, but I felt it was time to rebuild from the ground up.
You can get away with 20% lightning infill (Slicer: Cura) on the outer walls for faster printing. For everything else use traditional infill at around 12%
I recommend shorter layer heights (.12mm-.16mm) and slower ...
2023-05-01 12:00:09 +0000 UTC View Post
I wanted a jetpack for the Armorer that fit nicely into her fur so figured we needed to create it from scratch. Pegs into the Black Series hole perfectly.
Thanks to The Glowing Ghost taking my commission. I hope you all enjoy!
2023-04-22 16:39:06 +0000 UTC View Post
Excited to start building out Dok-Ondar's shop ahead of his release later this year (Fall 2023). The Sith Chalice pictured is available on my page as well.
Will be adding more props soon! Excited to hear your thoughts and ideas for future additions....
2023-04-15 16:51:40 +0000 UTC View Post
With the recent Dok-Ondar Black Series announcement I'm putting together a Den of Antiquities interior diorama. Stay tuned for more fun objects and feel free to make requests in the comments below!
This awesome sculpt was done by DS Artwork exclusivley for my...
2023-04-14 18:25:55 +0000 UTC View Post
The photos should speak for themselves here, some additional images included with the .zip to aid in construction.
Orange filament used: https://amzn.to/3m1DDyc
2023-04-03 22:28:09 +0000 UTC View Post
More cantina friends for your shelf! Repainted Lando and Teeka bodies pictured.
Also happy to introduce alien hands that should peg right into existing wrist holes.
Enjoy!
2023-04-01 15:57:36 +0000 UTC View Post
I started working on this before it showed up in The Mandalorian S3, so I was excited to see it as a central location for one of the scenes. Should be fairly versatile for toy photography as well. Enjoy!
Thanks to Hammerfall Customs for doing the tower and wall greebles.
2023-03-18 18:29:45 +0000 UTC View Post
Hey hey!
Happy to partner with The Glowing Ghost again to bring you 15 different Anzellan variations!
2023-03-17 00:15:02 +0000 UTC View Post
Thanks to InprintCondition for adding this awesome detail to the N1 Starfighter he created for my Patreon last year.
A lot more to come this month, for PLA and resin. Stay tuned!...
2023-03-16 21:39:18 +0000 UTC View Post
I'm so excited to finally have these done, after dozens of prototypes, these sculpted Jedi robes are finally ready.
For my prototypes I used a 50/50 combination of Resione TH72 and F69. I used the 2023-03-09 00:00:13 +0000 UTC View Post
Been wanting to revisit this for awhile.
All pieces are split to fit a 200mm build plate and do not require print supports or paint.
SHFiguarts throne pictured, but recommended throne files available here: https://www.thingiverse.com/thing:2996521/fil...
2023-03-04 21:43:10 +0000 UTC View Post
These character guides should help you choose fodder bodies.
For Kithaba (left) I used General Lando, Jawa bandolier, and Cassian vest (clipped).
For...
Enjoy! Class dry brushing techniques will do wonders on these rocks.
2023-02-25 16:52:15 +0000 UTC View Post
Another alien head for you to print this month in resin.
The body on the left is Rose Tico with a General Leia vest.
2023-02-19 22:07:18 +0000 UTC View Post
Some more Jedi accessories for your figures. I printed the Holocron at 12mm tall but you can adjust. The helmet was printed 36mm on the long end.
For the holocron, I just painted it blue and used a gold sharpie along the raised edges. Super easy!
The helmet lines are indented for easy painting.
Enjoy!
2023-02-13 22:08:53 +0000 UTC View Post
I wanted to challenge myself to create a single print diorama with zero supports, so everything here is designed carefully to print in one go.
This is the filament I used: https://amzn.to/3lwkQKX
2023-02-12 18:16:41 +0000 UTC View Post
Designed with toy photographers in mind, this modular tunnel prints with 0 supports, requires no paint and has open-side variants for getting those tricky angles.
Choose your filament colors for support-free and paint-free printing!
It's also infinitely extendable with simple pegs for connection.
2023-02-02 18:58:35 +0000 UTC View Post
The first of an ongoing series, I'm excited to present these awesome Cantina Patron heads sculpted by Tristan Miller exclusively for my Patreon.
I printed these at roughly 20mm and 36mm wide respectively. But you'll need to experiment with your slicer and br...
2023-02-01 19:08:34 +0000 UTC View Post
Here is a selection of pipes, crates and wall panels you can use to build out a Kamino Cloning Facility as seen in Battlefront II. I used acrylic panels from Amazon to build out the floors so they'd be shiny.
White floor panel: https://amzn.to/3Xz86AU
Black floor...
I printed the Black Melon at 14mm wide, you will need to adjust in your slicer.
2023-01-11 19:59:25 +0000 UTC View Post
Now that the HK-87 droids are releasing in the Black Series I decided to tackle this diorama I've been wanting to do since the Ahsoka episode of The Mandalorian.
I think these colors will work great:
Green: https://amzn.to/3QgysFn
Brown: 2023-01-06 00:59:26 +0000 UTC
View Post
A quick print for y'all today.
Make sure you turn off supports!
Minimal glue required to attach small greebles to avoid needing supports.
2022-12-21 19:06:14 +0000 UTC View Post
This is resin printed and "painted" using a gold sharpie and a black Gundam marker. I used a bit of flex resin so it doesn't snap, but print a good number of these since they are so delicate. Depending on the character you put these on, you may need to tweak the height/width in your...
2022-12-08 19:46:50 +0000 UTC View Post
I've been really enjoying making paint-free modular dioramas lately that can fit whatever shelf display or photography needs that you may have. This prints support free and the only glue is to attach the light fixtures to the "ceiling".
Enjoy!
2022-12-02 18:19:22 +0000 UTC View Post
I'm excited to see what you all make with this. Happy holidays!
2022-11-24 12:00:07 +0000 UTC View Post