Landspeeder Luke

Kamino Cafeteria

This felt like an appropriate Thanksgiving post!

A bit of sanding on the top of the table will give it that smooth concrete effect. Don't forget to turn off supports so it doesn't fill that crevice on the surface of the table.

Happy Thanksgiving to all of you!

Jabba's Dais / Throne / Platform (Updated)

I've made a simplified version that prints in just 2 pieces. You can probably get away with a lower infill around 8% to make this less heavy.

This one is also smaller and measures 13.5" wide x 7" deep.

The larger one is still available here: https:...

Lars Kitchen

A cute support-free print and I'm excited to see what you do with it!

Don't forget you can use lots of little pieces from older dioramas to populate the kitchen if you'd like to build it out some more. Enjoy!

Captain Panaka

With the new Padme and Anakin being revealed it seemed time to bring Captain Panaka to the shelf!

Designed to fit on the Grand Moff Tarkin body, you will need to clip the forearms right below the elbow joint to plug into the gauntlets. You might also need to widen the hand hol...

Tusken Warrior Kit

This kit was made utilizing a 3D scan of Dark Rey and sculpted by The Glowing Ghost. This will be great to accompany the Tusken Chief when that releases. 

Enjoy!

Sewer Escape

A fun original design based on some classic scenes from The Bad Batch and Clone Wars, you can probably get this whole thing printed in a day! No supports or paint needed. Enjoy!

TVC Boba Fett's Throne Room Scale Upgrade

Hey everyone! I loved the TVC Boba Throne Room set and wanted to see how it would look with Black Series figures. I realized all it needed was a slight height boost and a new dais, and that most of the accessories sti...

Dexter Jettster

Happy to present another Collab with @TheGlowingGhost!

Mos Eisley Cantina Entrance

An easy, support free, diorama, the main body prints in one piece. No paint required other than on the droid scanner. The gold trim piece is not screen accurate but I thought it looked nice as an option.

Sabine's Poncho

This was a difficult one to get right, I test printed 5 different versions and finally found the right balance between thickness and form. I'm excited to see if ya'll experiment with putting this poncho on other characters. Thanks to TheGlowingGhost for pulling this of...

Krrsantan Accessories

Inspired by the TVC Deluxe set, these will print at Black Series scale.

Peli Motto Kit

Made using Rose Taco and Dana Barrett. No face painting required, yay!

Thanks to @Sun_weskong for help with the pouches.

Buried X-Wing

I wanted to find a reasonable way to bring a 1/12 X-Wing to your shelf. The dirt piece is separate, and the only paint in this image is the red on the wing.

Some rocks and other "buried" pieces are included to complete the look.

There's also a stand to support the wing if you'd like keep it on the shelf Dagobah-style.

UPDATE: D...

Eye of Sion Deck

Prints support free on Ender 3 or similar.

I haven't used this gold filament but the color looks great.

The sticker files are included and should print at proper scale on 8.5 x 11 paper at 100%. I used a matte sticker paper.

Enjoy!

Loth Cats!

TheGlowingGhost has been killing it this month with these sculpts for me. At 100% scale this prints as shown. Enjoy!

Sabine Training Set

Special thanks to JCirion3D for sculpting the helmet for me. Check out his Instagram and Patreon.

The best part of this set is you don't need to use your actual Sabine figure.

Update: ...

Map Ball Diorama

I couldn't wait to bring this scene to life on the shelf.

The map ball is designed for resin printing but a split version is available if you'd like to attempt with filament.

You can mess with the mirror/size settings for the rune pillar to add variety.

Mini Collection Shelf

Whether you want to pair this with your Selfie Series figure, Indiana Jones or other 'collectors', I thought it'd be fun to have a mini IKEA Kallax shelf on my shelf.

And yes, those are mini-hexagon stands for your Micro Galaxy Squadron figures. (That's the Hot Wheels Razor Crest.)

Also, if you want to print one of my dioramas at 8% ...

R2-D2 Drink Tray

I made a filament-friendly drinks tray for the newly scaled Black Series R2-D2. This is a paint-free sculpt design if you want to get the linked filaments, I used a piece of clear filament as the tube.

When I need to glue small pieces like this, I use the end of a toothpick to dip into a small puddle of 2023-08-11 17:02:14 +0000 UTC View Post

HK Droid Pike (Updated Sculpt)

From the newest Ahsoka trailer, a new weapon for your HK droids. Scaled for Black Series.

UPDATE: Now that we've seen the show, I've updated the sculpt to better match what we see in live action.

Cantina Aliens - Labria, Nabrun Leids, Takeel

Inspired by the classic Power of the Force Cantina Aliens 3-Pack, I'm excited to present these new alien heads by @TheGlowingGhost, exclusive for this Patreon.

The extra arms piece fits perfectly onto the torso of Hoth Leia. Heat and pop at the waist and slide it on.

Pyke Speeder

"Think it through..."

Darth Maul Hood and Bandolier (Rebels)

Thanks again to TheGlowingGhost for knocking this out of the park. Pre-scaled to fit perfectly to our 3D-scanned Black Series Darth Maul (Old Master) figure. 

Hood-up options included as well, if you're using the hood-up version, make sure you print the corresponding scarf and use flex resin or a bit of heat to squeeze it over his hea...

Jawa Junk

I teamed up with king of greebles Hammerfall Customs to make some, well, junk! Optimized for both resin and PLA prints. Don't forget to play with scaling to increase the possibilities and variety. Half-buried versions of the parts also available.

Momaw Nadon (Hammerhead) Kit

So excited to present this new kit sculpted by @TheGlowingGhost for you all! We 3D scanned Dok Ondar without his robes to make sure this kit fits perfectly and were both pleasantly surprised by how well it worked! He should fit nicely with your other 2023-07-13 18:56:05 +0000 UTC View Post

Temple Mine Cart

Happy to provide some world building for the Indiana Jones Adventure Series line! Printed in the Overture Matte Chocolate filament.

Ghost Bridge

As promised when these were revealed I'm happy to release this simple Endor  bridge print, with a special clip to hold Yoda. Also available without the clip

Prints support free! Shown here in Overturn Matte Chocolate filament.

Brock Starsher joins the skiff guards!

Excited to add Brock's helmet and weapons to the skiff guards. To keep things simple I've added his files to the original post.

The Great Forge - The Mandalorian Season 3

The Great Forge from The Mandalorian finale is now available to 3D print!  Shown here printed in space gray.

Skoova Stev - Jedi: Survivor

Skoova Stev sculpted by TheGlowingGhost exclusively for you all!