What's this?
A tiny dong? Could it be?
2020-10-22 21:56:07 +0000 UTC View Post
BuiltUpBeasts posts
Large Asterion!
Just finished the medium one, and already going for the large! This beast will be BIG! 11 inches tall, most likely a 10 inch useable length.
2020-09-15 21:32:29 +0000 UTC View PostLarge Zraza!!!
The large size of Zraza is ready!!! I still have to do one more test to see if it's all good to go, but from the first test it seemed pretty good!
2020-09-15 21:29:57 +0000 UTC View PostUV!!!
Going to be playing around with some real UV pigments today! Hopefully it turns out as well as I'm thinking it will!
2020-09-12 18:10:14 +0000 UTC View PostGetting it done!
Small Daujin is being molded right now. Printing the mold shell for large Zraza. Then I'm gonna print the mold shell for large Daujin!
2020-08-02 20:04:39 +0000 UTC View PostModels ready!
These 3 models are basically ready to mold! Small Zraza, small Daujin, and large Zraza! This beast is huge!
2020-07-23 21:05:11 +0000 UTC View PostLarge Zraza! FAILED ðŸ˜
Print failed...
This time printing in ABS so it can get done sooo much faster. It will take about 30 hours to finish. One it's done it will be sanded, and vapor smoothed. Then he will basically be ready to mold!
Small ABS Zraza
It's done printing! It turned out really good. There is a line I will have to sand out, but other than that it printed beautiful!
After one initial sanding, it's onto vapor smoothing, then a final primer layer, then mold!!
First ABS dong print!
Update: 6 hours in. Looking really good!
Printing small Zraza in ABS right now. This is the first time I've ever tried printing a dong model in ABS. I hope it works well. And if it does, I'll be able to vapor smooth it. Which means I can go from print to mold SOOOO much faster!
Minotaur almost done!
This Minotaur print is heading into the final stages. It's been sanded, primed, primed again, and sanded. Now it just needs some spot sanding, another layer of primer, then we see from there if it needs another sanding or not before sealing. After sealing it's another layer of primer to get that nice, smooth, satin like finish I love. And final ...
2020-07-01 09:00:24 +0000 UTC View PostMinotaur again!
Edit: almost 5 hours in... 14 1/2 hours to go :)
Printing another Minotaur model of the same size on my new printer. I want to see if it will print better this time. Because better print = less processing time = less frustration with processing = model gets released faster
Minotaur is done!
Hot off the print bed. He looks great! The base could have printed better, but I'm hoping to fix that issue with more calibration on my printer soon.
This will be the medium size!
Rough dimensions
Total length: 9.1 in
Useable length: 8 in
Tip circumference: 7 in
Mid shaft circumference: 7 in
Base shaft circumference: 7....
Minotaur!
Now that the large Daujin is done, it's time to start the Minotaur print! That's not going to be it's name, I'm just using it now because that's what it was inspired from. 26 hours to go! 😬
Update: About 55% complete!
Large Daujin is here!
Just finished printing. About 20 hours total time. Tbh it's probably the best quality print my 3d printer has ever done!
Here are the quick measurements I just took.
Total length: 9 inches
Useable length: 8 inches
Tip circumference: 4.25 inches
Mid circumference: 6.25 inches
Base of shaft circumference: 8.25 inches
Daujin
Large Daujin is on its way! Finally got my 3d printer fixed :)
Update: 16 hours in!
He's done!
Literally just finished printing, he is big and beautiful! First picture is side by side with the original medium size. Second pic is to show how far my hand wraps around the original, third is to show the difference between the size.
2020-05-25 20:29:38 +0000 UTC View Post21 Hours In
And he's still printing! Also, I don't have big hands. I know it's not the best method of sizing, but I don't want to ruin the print by putting anything on the bed
2020-05-25 17:43:28 +0000 UTC View Post11 Hours In
And he's about 1/3rd of the way done... Ish
And he's BIG!
Large Zraza!
Started the large sized Zraza today! I made the file a long time ago so I have no idea how long it's gonna take. But once I do it will be posted here first with a comparison between the original "medium" model!
2020-05-25 00:25:10 +0000 UTC View PostI think the pours are getting better :)
As the title says, I feel like my pours are getting better. I'm becoming more confident in my work, and I think it's showing! Also, I think my color palette is also getting better. Then again, it might be the inspiration photos in the comments of my Twitter 😂
2020-05-23 05:15:43 +0000 UTC View PostNew Sculpt!
Just finished sculpting this one.
What do you think?
(Loosely based off "The Gleam Eyes" from the anime SAO)
New Model!
Printing a test model right now to make sure the sizes are correct.
I still don't have a set name for this one...
Petra, Aura, Axium, Xant, or Auraxium?
Nardix Pour
Now for a soft orange and black marble for nardix
2020-04-28 19:42:44 +0000 UTC View Post
Drop is Live!
There's a couple more items in the shop now! Including these two beauties!
2020-03-28 22:48:26 +0000 UTC View PostLeft me speechless
Just pulled this from the mold. And it's definitely a show piece. Yes it's gonna be for sale, hopefully soonish. Because if I have to stare at it much longer I might just keep it...
2020-03-15 09:17:47 +0000 UTC View PostVery Bright!
Just poured a very brightly colored marbled Zraza. Probably the most vibrant toy I've made to date! And I'm seriously hoping it turns out how I think it will :)
2020-03-05 19:10:01 +0000 UTC View PostDaujin is here!
The new model of Daujin has been molded and cast! And I'm super close to getting a really good 3 color fade! I'm very happy with how this one turned out :)
2020-02-28 09:12:12 +0000 UTC View Post