Hoocho

Grow Spike Update

This is an updated Grow Spike design that lets you wrap a single wicking chord all the way around the spike and tie it off.
This solves the issue of multiple cuts and the wicking chord coming off when you remove plants.

I have also narrowed the spike allowing for the Grow Media to contact the wick more.

This will fit the Auto Sp...

US and AU Updates

The Float Cover now Prints better and a whole new pipe style for AUS

As well as pipe Joiners to extend length of RGGS

Files are in the download post at the top.

Cheers Guys!

The Hooch Auto Spike Release

This is an exciting release.

The Hooch AutoSpike Hydroponic System

https://youtu.be/4M087652-e8

This hydroponic system allows you to use cheap growers pots over a base with a float valve that wicks through a grow spike.

The link is ...

Hooch Bucket available in USA, Canada and Mexico

Below is the link to the first batch of hooch buckets ever available in the Americas.

As patreons I am giving you first access for the next 24-48 hours.

There are 166 x 12 bucket units available.

https://a.co/d/gknbVK9

Updated RGGS Float Cover (US and AUS) Updated AU End Caps and Blanking Update

Int the latest video I release an updated float cover version contained within the latest Updated Australian RGGS ends.

This is compatible with US gutter ends as well as retrofittable to previous AUS and US versions so you don't have to replace all your ends to use it.

The current link to download is found in the *first pinn...

Link to Download and Instructions

This includes important information about where to find the files and how to split them....

Please note. This Patreon direct message inbox is not monitored. This patreon provides value in the form of Practical Prints.

All information on downloading prints is provided below:

IMPORTANT:

All STL files are to be found in the ...

Cheap Filament

A lot of people are asking where I buy my filament so cheap, the answer is EBay.

You have to shop around but you can get it between 11-13.50/Kg for black PETG

2024-10-02 04:47:30 +0000 UTC View Post

[Latest File Link] 3D Printable Chicken Feeder and Simplifying the Patreon System

Here is the Chicken Feeder Featured in the upcoming Video

I've also decided to simplify the Tier System

Now Everyone will have access to both the All The Gear Prints and the Hoochos Prints no matter your sub level.

The Higher tier "Hoochos Plus all the gear ' will get access to a prerelease folder that I will put all the p...

TomaHook Tweak

Hey guys if you downloaded the original, just letting you know I tweaked the file to fit more on the bed, and added a tie point for the string.

Both old and new file is available in the folder.

Cheers

Tomahook Tomato Training Hook

Been Meaning to make this for a while, finally got around to it....

Only takes 18g and is remarkably strong.

Enjoy!

https://drive.google.com/drive/folders/1W9Ulr20RP7fXWGC8JRUD...

The Hooch Auto Bucket Release

This is a Print I've been working on for a long time.

It works flawlessly

Print without supports as usual.

Video Imminent.

I've allocated a batch of 166 x 12 packs of hooch buckets for Amazon USA, it won't be enough but I'm feeling out the process before I go all in.

I'll release the details on here fir...

Kris Baileys Seed Propagation Planter MINI

This is Kris Baileys Mini Propagation Planter which he sent me to provide in the Community folder.

This was actually the thing that got me inspired to create the larger auto refillable wicking one that was released last month.

This will be found in the latest release folder, and moved to the community folder at a later date.

...

Self Watering Seedling Propagation System

This one is a big one
https://www.youtube.com/watch?v=g0jKMf_euUM

I'm getting in the habit of including a bit more info with the files... And a STEP version for anyone who wants to tinker!

If you do come up with anything cool flick me an em...

Hooch Bucket Lid and *Bonus* Self Watering Planter Base

Steven Simpson requested the lid on the Facebook group and I had honestly just forgot to release it....

But I've designed a self watering pot base for the Hooch Bucket too...

So I figure... Have that too!

There is a video... Not sure when it will be released... But enjoy.

It's located in the "Hooch ...

Testing Phase

3D printable self watering seedling propagation system.

Kratky Bucket Lid (Latest Files Folder)

This is the DWC and Kratky Bucket lid (and net cups) to allow you to use cheap buckets that don't have lids.

Video Is uploading now.

These fit over 295mm buckets (at 100% scale), scale up or down depending on your bucket size and printer bed size.

At 100% the file fits perfectly on the 256mm Bambu lab bed s...

Australian RGGS end cap Adapter to a Quick Connect fitting (Latest files folder)

This is Henry Lims Remix of the Australian end caps to Adapt to a Quick Connect fitting.

Thank you to Henry for this remix.

If there is enough interest I can make this adaptation for the US End caps as well.

Let me know below what you'd like to see in a revamped end cap file.

And I'll Try make it happen.

...

Update Modular File

Hey Guys if you downloaded the Modular Hydroponic System when it was in Version 11, Update it to version 14
The bayonet was a few degrees off perfect and it annoyed me.

Fixed now.

If you're already printing it's not a problem that you need to worry about, just change over for future prints.

Modular Vertical Hydroponic System Release (Latest Files Folder)

This has Taken Months....

Video is uploading now.
Works incredibly well... I'll let the video do the explaining....

The only reason I can spend months developing this stuff is cause of you guys.

So. Thank you! I enjoy this immensely and I hope you do too!

2024-05-10 08:08:27 +0000 UTC View Post

13mm Irrigation Line Clip has been added to the Hooch Bucket Prints Folder

I forgot to add it in the last post with the dutch bucket adapters.

Enjoy

Bato/ Dutch Bucket Adapter for Hooch Multi Buckets (Latest Files Folder)

Had a few Requests for these and I'm now happy with the results they have produced.

Video upcoming (few weeks away)

But here they are.

These files are for you only.

Please do not share the files.

Yours and others Patreon support keeps the channel going and allows me to create niche content and creations like thes...

Bambu Labs AMS Cardboard Filament Guides (Latest files folder)

These are the files featured in the upcoming 3D Printing video which will give more information (and showcase some other upcoming prints)

The Bambu labs AMS is not compatible with cardboard spools (they work but long term the cardboard can cause problems with the gears of the machine)

These are filament protector guides that a...

Hooch buckets available now…

It’s almost impossible to communicate through an organisation so the emails were sent.

🤦

I tried very hard to get prerelease access for Patreons but somehow it slipped through the communications again.

I won’t make that promise again.

Appologies.

I’m gunna get some free merch for patrons to claim...

Multi (material) colour prints…

I am interested in finding out whether you guys are interested in multi colour prints…

I have just started printing on an X1C from bamboo labs with the AMS multi material unit.

Going forward I think this technology will start to become more common and affordable and I plan on integrating multi colour comparable prints into my futur...

I’m sick of specifically designed spice racks…

So l specifically designed this spice rack...

To fit all the spice jars I have.

Ironically it also perfectly fits a specific spice container that is available to myself in Australia that I like as well.

So it's a specifically non specific spice rack designed for a specific container.

Because nonspecific irony is the spice...

Hooch Multi Bucket and Tier System Update

A shipment of 200 “12 bucket packs” is due to come in on the 19th of April.

I have communicated with the Hydroland/kegland distribution that we will be releasing a private link to Patreon to purchase before the general public.

On this date I will also be releasing multiple 3D prints that I have tested for your use as well.

...

Bayonet Moss Poll Release (Latest Release Folder)

These are the files featured in the latest Update video

These files are for you only.

Please do not share the files.

Yours and others Patreon support keeps the channel going and allows me to create niche content and creations like these that the YouTube algorithm (and advertisers) do not appreciate as much as you and I.<...

Hooch Bucket Redesign and Rerelease

Video Incoming:

Multiple New Files

Enjoy :)

These files are for you only.

Please do not share the files.

Yours and others Patreon support keeps the channel going and allows me to create niche content and creations like these that the YouTube algorithm (and advertisers) do not appreciate as much as you and I.

T...

3D Printable Plant tags (Latest Files Folder)

I have added these into the Latest file folder. (Linked Below)

These files are for you only.

Please do not share the files.

Yours and others Patreon support keeps the channel going and allows me to create niche content and creations like these that the YouTube algorithm (and advertisers) do not appreciate as much as ...

Chicken Feeder with 3D Printable Parts

Here is the video for the print just released.