Maple3D

Figure Stand

Out now over on the website you can grab this super easy to print Figure Stand! I have designed two versions, the first has small cut outs at the bottom of the stand that fits the included connector piece so that the stands fit snug together and will slide around as one unit if you need to move them. The other version does not have the cut out a...

A Legendary Skull!

I think this has to be one of my favourite skulls so far. Out now over on the website you can go grab the new Rayquaza skull in either the hollow or solid version depending which you prefer. I have set it up so that the horn things can be printed separately to make it an easier print and so that you can go BIG with this one. It will need minor s...

Karp Karp!

As I mentioned in the preview post yesterday I have updated the popular Articulating Magikarp to something that is now completely support free and a cleaner design. You can now go and grab this file from the website as a regular stl or a painted version for Prusa or Bambu.

Not much else to this one but tons coming soon!

Website Access Updated!

Just a quick post right now to let you know that everyone's permissions on the website have been updated. If you have hit the 3, 6, or 9 month landmarks then you should have access to those pages now. If you don't but believe that you should just send me a message and I can get you all sorted.

The first file for the month will be out later...

April Preview!

Hold on to your socks because it's going to be a wild month! Let's start off with the results from the poll that ended last night that will get you a Basic and Ornamental version. Our top four from the poll that will be modeled are in no particular order...

Starmie
Roaring Moon
Oshawatt
Absol

Thank you to all of you that got...

You Decide!

Another month is coming to a close and that means it's time for another poll to decide what gets modelled in April. As always it will be the top 4 at the end that will get made so choose wisely if you have a couple favourites. This poll will run until March 31 - 5pm EST so make sure you vote before then. I think I have a nice variation for optio...

Just in Time for Easter!

Well to finish off this jam packed month you have another adorable knit print that is perfect for this Easter weekend! Ready to go is this adorable Knit Buneary that should be able to print with no or minimal supports and is already painted in both Prusa and Bambu for you guys. I think I'm starting to get a good process down for these knit model...

#350

The last of this month's poll picks is out now so head on over to the website and grab Milotic! Both the Ornamental and Basic versions can be printed without supports but do what you feel works for you and your machines.

This was the last of the poll picks but it wont be the last model for the month so stick around and find out what is st...

Going a little Super today!

Today's release is a bit of a doozy and a little different than what you usually get from me but I hope you're ok with that. Whether you're a fan of Dragon Ball or not I think either of these two models is well worth the print and if I'm being honest, this has to be one of my top pieces that I have designed.

First up you have the Diorama ...

More Articulating!

I hope everyone is having a great Sunday so far and have the itch for another articulating print! To finish off the Nidoran Male evolution line you now have Nidorino available for you to go grab over on the website! Just like Nidoran you wont need any supports for this one and you have painted files for both Prusa and Bambu.

Enjoy the rest...

Add some Rosé to your life!

So I have been watching Dragon Ball Super lately and for those of you that have also watched the series you will know exactly what this new print is referring to and I hope you enjoy it just as much as I do! If you haven't watched it I would strongly suggest you do but long story short there is a Super Saiyan Rosé stage and this was something I...

Articulating!

Todays new model is a super easy, print in place articulating Male Nidoran! You wont need any supports for this quick and easy print and if you have a MMU setup for Prusa or for Bambu there are painted files included.

Not much else to it so go grab those files and share those prints!

#280

Another file is out and ready to go if you want to head on over to the website and grab it! The newest addition to the collection is Ralts as you can see from the pictures. Both the Ornamental and Basic versions will need some supports under the top head piece but other than that you should be good everywhere else. 

I have a bunch mor...

#744

I hope everyone is having a great start to the week and you are itching for something new to print! If you want to head on over to the website you can grab the latest release and another from our poll, Rockruff! This guy can be printed without supports just like we all like in both the ornamental and Basic versions. 

More to come so s...

More Cuteness!

Well in case you couldn't get enough of the knit/hand made feel from the Gengar the other day then you have another ready for print now! Switching it up this time and heading over to the Digimon world you have this adorable Patamon Plush print. You can print this one without supports and like most stuff lately I have done up a painted file for P...

#725

This month's first models of the poll picks is no up and as you can see it is our kitty cat friend, Litten! You should be able to get away with minimal supports on these, probably just underneath the whiskers if anything. Both Ornamental and Basic versions are ready for you so head on over to the website and pick them up!

Have a great day ...

Comfy, Cozy, and Spooky!

If you read one of the previous posts you may remember I mentioned that I was starting to learn some new programs for sculpting and this model is a product of my learning! I tried the crochet/knit stuff a few months ago but wanted to give it another shot and thought this was the perfect time. I think this one turned out much better than the prev...

Desk Organizer

I know most of us will probably admit we have a messy desk most of the time but worry no more! The Poke Center is here to help the Pokemon and keep your desk nice and tidy! Out now is a one piece or two piece print of the Poke Center desk organizer or if you want to just have the regular building for your diorama scene you can have that too. I h...

Website Permissions

Just a quick post to let you all know that the website permissions for those eligible for the Archive and Loyalty packages has been done. If you think you should be able to access one of those pages but can't, just send me a message and I will get you all sorted out. 

Enjoy the rest of your day and weekend!

Easter Eggs and a new Desk Mate

The first files for the new month are available now over on the website. As I mentioned a few days ago in the preview, you have 8 new Easter Eggs to choose from and all can be printed without supports. If the eggs aren't your thing then maybe the Grimer Pen Eater is! This guy can also be printed without supports so there's no reason to not have ...

March Preview!

You guys have spoken and the results for the March poll are complete! The top four in the results and those that will be modelled are as follows:

Milotic
Litten
Rockruff
Ralts

Thank you to all of you that got in on the poll and contributed to the March models. Aside from the poll picks we will have a bunch of other models co...

#202

Last but not least for this month's poll picks is Wobbuffet and it is ready to grab from the website! You can print both the Ornamental and Basic versions for this without supports just like you all like. 

That's about it for this one so go grab the files and get printing!

A thank you and the March Poll

First off I wanted to give a HUUUGE thank you and shout out to all you wonderful people who have decided to join this Patreon and support me and my dream. We finally broke the 600 member mark after a while of coming just short and that is a huge landmark goal for me Personally. I have been hard at work learning some new programs to expand my pot...

The Original 3 are now done!

For those of you that are a fan of these guys you now have all three of the original starters to run off and print! Squirtle and Bulbasaur have joined their friends and both can be printed without supports. You also have painted files for both of them in Prusa and Bambu files for those that have those machines.

That's all for now so enjoy!...

Chattermax!

Another day, another file for you all to run off and print! For those familiar with the loveable Bluey show you know this demon toy as Chattermax. This is a super easy print and can be done without supports so I'm sure you and your kids will love this one. 

More coming soon so hang tight!

Here we go again!

Another has come to join the party and this time your best friend Charmander is here! You can print it without supports and you have painted files for the Prusa and Bambu machines to go along with the regular stl. Not much else to say other than have fun and happy printing!

#656

Happy Saturday, the weekend is here! I hope you are having a great day so far and in the mood for some new files to print. Over on the website you can grab the newest Ornamental and Basic files, Froakie! You should be able to print these guys without supports but as always, do what you feel works for your machines.

That's all for now so ha...

Chess Set Expansion Pieces

Hey everyone I have just added a bit of an expansion set to the previous chess set that was released. I have built out some more pieces to be able to have a full Psychic side if the Fire and Water weren't your cup of tea. As well as those extras I have added a Charmeleon piece to go along with the Charmander and Charizard pieces and have also ad...

Pika.... What?

Well I hope your in the mood for a good chuckle because this model was a funny one to design! Today you have this derpy Pikachu ready to go without supports and included painted files for both the Prusa and Bambu printers. This is a super quick, fun print that even with 6 colours can be printed in under a day so no excuses to not give this one a...

Articulating!

Happy Valentine's Day to all you wonderful people! You are all so amazing I thought I would add a "spark" to this lovely day by uploading the Articulating Zapdos files for you all to add to your collections. You wont need any supports for this guy and I have added painted files for those that have a Prusa or Bambu printer. 

That's all...