Maple3D

Sleeping Xmas Eevee

Christmas is at the top of a lot of peoples list so why not add to your Christmas decor with a festive sleeping Eevee! Everything has been split into each colour so you can get the full colour version without an AMS. You might need some minor supports but nothing too crazy.

Enjoy!

Umbreon Diorama

This month's diorama and bust are out now and there's a lot to download and print! When it comes to the diorama you have a complete version, a split version, and a supported split version for those with a resin printer and want to just hit print. You also have the working Lychee file for the supported files if you need to make any small updates....

Articulating Legendary

Another one of the articulating minis is out now! Lugia is ready to go with a 30 minute print with no supports and a 3 colour 3mf file for those that want the full colour treatment. Super simple and easy print to play around with so why not give it a print?!

Enjoy!

The Champ's Skull

The files for this month are starting off with Machamp's Skull! You can get this one in both the solid and hollow versions as well as a version that sits in the included display stand. The hollow version is the only one that will need any supports

Enjoy!

November Preview

Thank you to all of you that voted in the poll and contributed to what models get made this month! For November you can look forward to getting these four in both the Ornamental and Basic versions

Dragapult
Hawlucha
Shaymin
Pachirisu

If you have any recommendations for next month make sure you comment here to let me know. 2025-11-01 16:03:57 +0000 UTC View Post

Vote for November!

Use your voice and contribute to the next month of files! Follow the link below and vote for one of the ten characters available. The top four will be the ones picked for both ornamental and basic versions. If you have any suggestions there is a spot available for you to speak your mind. You have until October 31 to get your vote in!

Buzz Buzz

More Ornamental and Basic models are out now for you to print! You can now go and grab the files for Beedrill. Both models may need some small supports depending how your machines handle overhangs. You also have the full coloured 3mf file for those with an AMS.

Enjoy!

209

Go ahead and grab some new files today! Ornamental and Basic versions of Snubbull are out now. You should be able to print both versions without supports and you have a painted 3mf file for those with an AMS.

Enjoy!

Dragonite Diorama and Bust

This months Diorama and Bust are out now! For the Diorama you have two versions available to you, Dragonite attacking or not attacking. All of the files come pre supported for resin printers as well as has the working Lychee file for any personal updates you may want to make to the files. The whole diorama has been split for easier printing. 2025-10-13 16:17:39 +0000 UTC View Post

Legendary Minis

Go ahead and grab the newest files out for all of you today, the Articulating Legendary Birds, mini version!

All of these can be printed without supports and on my Bambu I printed them in about 30 minutes so nice and quick. You have painted 3mf files for all three of them if you wanted to go for the full colour versions.

Enjoy!

New Switch Dock

A new Nintendo Switch dock is out now and there are versions for the original, OLED, and Switch 2. Just print out the frame for the Switch version you have as well as all the pieces for the Bulbasaur design. Depending how your bridging is you may need some supports on the Bulbasaur frame where it connects to the main piece but other than that yo...

Mega Skull

The first files for the month are out now! Go and grab the files for the Mega Charizard X skull and print either the solid or hollow versions for some new decorations this Halloween. The solid version shouldn't need supports for the FDM but the hollow will need supports on the inside and for the eyes. There are also pre-supported files for the r...

Poll Results and Preview

Thank you to all of you who participated in the poll! I have the results all counted up and here they are. You can expect the following in both Ornamental and Basic versions...

Arceus
Blaziken
Beedrill
Snubbull

Aside from those 8 models you can take a look at the Diorama concept I have in progress already which is of Dragoni...

Vote for October!

Follow the link and vote for what you want to see made in October!

https://s.surveyplanet.com/fepd372e

Possible models are:

Beedrill
Nidoran (F)
Hoothoot
Arceus
Snubbull
Scrafty
Pidgeot
Politoed
Blaziken
Paras

Cli...

#849

The last set of models from poll results is out now! you can go and grab both the Ornamental and Basic versions of Toxtricity, both needing a little support in various spots but overall, not too crazy. As usual you have the painted 3mf for the Basic version if you want the full colour treatment and you can get away with only using one AMS if you...

#173

New Basic and Ornamental design for the third model from the polls is out now and it is Cleffa! You should be able to print these without supports or with very minimal supports. You also have a full colour 3mf file that can be done with just one AMS.

Enjoy!

The Mega's, X & Y

Two more models are out for all of you now and they are some of the newest Mega's announced! You can go and grab the files for both Mega Raichu X and Mega Raichu Y, both available in a painted 3mf file for the full colour treatment and I have split the files so that they're easier printing.

Enjoy!

Team Up Diorama and Splash Bust

The diorama for this month is now out and I love how it all turned out! You have a bunch of files to go grab starting with the main diorama itself all split for easier printing and to make it even easier for you on the resin printers you have pre-supported files of all the pieces so you can get this one printed as fast as you can.

You also...

#239

Another two models are available for you today and it is the second set from our poll results. Elekid! Ready in both Basic and Ornamental you should be able to print these with just some minor supports here and there and you have a painted 3mf file ready to go for the full colour version.

Enjoy!

#650

New models are out now and this time it's the Basic and Ornamental versions of Chespin! You will most likely need some supports under the head but other than that you should be ok. You also have a painted 3mf file for those with an AMS and want the full colour version.

Enjoy!

Legendary Skull

Another skull is waiting for you to download and print! You can go and grab the Legendary skull of Suicune in a few different versions. You have your usual solid and hollow versions, the display stand for the solid versions, but I have also done a broken version of the skull. The broken version has the large oval shape broken off to help accommo...

What You Get Every Month

For some clarity on what you can look forward to when you are signed up to my Patreon here are some handy graphics to clear things up!

September 2025

Coming to you soon in September you can look forward to the following models and more! I no specific order for the Basic and Ornamental models you have...

Toxtricity
Cleffa
Elekid
Chespin

You can also look forward to another Diorama with this one featuring Wailord and Magikarp based off the Tag Team TCG card.

There wil...

#495

Another two models are out now and you have the usual Basic and Ornamental versions ready in both a solid and split version for easier printing. All versions will need some supports but nothing too crazy to get a good clean print. You also have the painted 3mf file for those with an AMS and want the full colour version.

Enjoy!

Vote for September Models!

Use your voice and vote on the next set of models that I will create! There is also a spot for suggestions if you have any ideas for the future.

Thanks!

https://s.surveyplanet.com/sdg3kdqq

#611

New models are out today and this time its Fraxure in both the Basic and Ornamental designs. I have split the side teeth from the main body so its an easier print but you will still probably need a couple supports to get a clean print. You can also grab the painted 3mf for the Basic version and that one can be done in 4 colours and just one AMS....

#241

Two new models are out now and its everyone's favourite cow! You have the usual Basic and Ornamental versions and both can be printed without supports. You also have a painted 3mf file for the Basic version which can be done with just one AMS with some strategic pausing.

Enjoy!

Greymon Diorama and Bust!

Another big set of files coming out today and this time were back in the Digimon world! You can go and grab the full Diorama and Bust of Greymon. Both sets of files come with a set of pre-supported files for the resin printers and a painted 3mf file of the Bust. You also have the working Lychee file if you wanted to make any changes to how the f...

Model and Planter

New files are out now and you have a few versions to choose from! You have Cacnea in the Basic and Ornamental versions, both of which can be printed without supports and you have a painted 3mf file for the Basic version if you have an AMS ready to go.

You also have a Planter version as well if you have a green thumb and want to spice up yo...

Agumon Skull

Halloween is coming soon so why not add some new skulls to the collection! The Agumon skull is out now and you can grab a few different versions depending on how you want to display this one.

You have the solid version that can be placed on to the included display stand or the regular version if you want to forgo the stand, both can be pri...