badobsessionmotorsport

The Escargot - Update!

It's been a while and due to popular demand, we figured there's probably three of you that still want to know what's going on with the R/V Camper, Motorhome, Race Transporter vehicle we started eons ago. So here you go!

Hope this answers a few questions and probably poses a few more.

Thanks as always for your support!

Cheers,...

BOM Offers

There's a bunch of equipment and courses that we used throughout episode 41 and I just wanted to give you lot heads up on what it's all about. Creality gave us the printer and the laser engraver - although we had bought their products before - and we're now part of their affiliate program. If any of you fancy either of those items, (or both) her...

Project Binky - Episode 41

In the penultimate build episode of Project Binky, we didn't get as far as we'd hoped. This is not unusual for us as you know, but this one was lined up and ready to go with just a few bits to finish off earlier in the week except for a nasty hand injury sustained by Nik that slowed us down some. Super glue was deployed to keep us going; after a...

Project Binky - Episode 40

Time flies when you're having fun...

To those of you that are still with us, you have our eternal thanks. Those who moved on, I can't say I blame you.

Crikey what a nightmare this one was. It was actually worse than epiosde 39 because we had every belief that we'd fly through it and be back on track. But as I've said before, the uni...

Binky Update - Feb 2025

There's nothing else to go wrong. I can't think of a single thing left.

The little mill rebuild went very well indeed. Not straightforward at all to convert what is essentially a small manual mill that had subsequently been upgraded to use stepper motors for control - to one that uses ball screws and not massively worn-out lead screws. Whe...

Merry Christmas!

We wish all you lovely people a very merry Christmas and a happy new year.

We had high hopes of bringing you episode 40 of Project Binky today but the universe intervened again because, well, of course it did.

Cutting out the last two pieces of the instrument cluster faces on the mill, they came out egg shaped. Turns out, after 2...

Howie Did It - 3D Printing a PCB

We might have been mildly distracted last week by a new arrival - we lucked into a solid 2 door Mk1 Escort shell - so we were very, very excited. No money was spent - we swapped it for our rotten R33 Skyline with a friend of ours.

Anyway enough of Mk1 Escorts (you can't have enough of Mk1 Escorts), here's the Howie Did It video on the 3D ...

Thank you, again.

We just wanted to say thank you again. The response has been phenomenal and we're truly humbled.

Your suggestions and help with the draft episode we're gratefully received and we acted on many of them.

We're hoping to complete the Howie video this week and next week we start on episode 40.

Cheers!

Nik and Richard <...

Gonna swap the Binky video

Due to my incompetence (thanks to Frank for pointing it out) I've got to swap the video out for an updated version later. Thanks to everyone who's commented on the YT version, don't feel obliged to rewrite on the new one.

Sorry!

Project Binky - Episode 39

Well folks, here it is: Episode 39.

Those of you who watched the draft last week will hopefully notice the changes and indeed we took on board your feedback and made some amendments.

We hope you enjoy it - it's been far too long in coming and we really appreciate those of you who stuck with us, and of course you new guys who have j...

Rough (very) cut Episode 39

Don't feel obliged to watch this. This is very much part of the editing process, one we use all the time: a rough cut to give us an idea of where we are and how much we still need to shoot.

It's not finished. We still have some pieces to camera and B roll to shoot and I've done nothing about the credits, levels and the transitions and gen...

It's coming - finally!

Despite mother nature's best efforts - flooding at Richard's house and the shed being cut off due to flooding - episode 39 of Project Binky is coming your way next Friday 25th October.

It's the most complicated edit I think we've ever done; there's footage going back a very long time alongside clips we're shooting right now and trying to...

State of Play - Some Good News

I've written much over the last year or so about all the things that have gone wrong with the process. Most boiled down to one or two things that were completely unforeseen and almost undetectable. Every time we fixed an issue, something else went wrong and then we fixed that and the original thing went wrong again.

It was like the unive...

If we didn't have bad luck...

We'd have no luck at all.

Sincere apologies for the radio silence recently, we've both been working through some issues externally as well as a boat load of issues in the shed. I'm not going to pretend that those shed bound issues are not almost wholly self inflicted but that's as maybe.

In exciting and somewhat unexpected news, th...

Binky Update!

The feeling of relief was palpable at the shed recently. We’ve been plagued by an issue we didn’t know we had and that has been going on for years unidentified. It hasn’t been a problem up till the advent of our metal solder 3D printing malarkey. Since the very first foray into this idea when initial tests on a cheap 3D printer showed prom...

The Inside Track - Too Fast To Race

We'll be back next week with an update on the Binky shenanigans that have been going on - suffice to say the struggle is real but we've fixed some existential issues that have been plaguing us from the start and we're now actually on the final assembly of the instruments! Yay!

In the meantime, this is the first of a new series called The...

New Channel Trailer

Thought you might like to see the new channel trailer we've been working on in the background. The original one is more than 10 years old now and a lot of water has passed under the bridge so we figured with Episode 39 now just a few weeks away, it was time for a new one. Hope you like it! 

We cannot wait to bring you the new Binky ep...

February Update

You deserve far more than a quick exclusive look at some of the footage coming out in the upcoming Episode 39 of Project Binky, but we thought you might like to take a look anyway. It's all hands to the pump trying to nail down what will be an epic tale almost certainly split into two episodes because there's just so much to show you. 

Fruits of our labours...

It's all Nik's fault. Well, nearly all Nik's fault.

If it wasn't for his absolute refusal to compromise on any aspect of the mini build, we'd have been long done by now.

We were astonished to find that you couldn't buy an aftermarket switch that has a backlight as well as the warning light. You can buy illuminated switches almost any...

New year - new BOM. (Not really)

We hope everyone had a terrific Christmas and new year, hope you didn't get too sober...

In BOM central, we're now in editing mode for episode 39; much footage is in the can, but there is much to shoot still. We're unsure currently how exactly the next episode will take shape; there's so much we want to show that it may end up being two ba...

A Fuelish Endeavour - Taking a Centenarian to the Pub

We're well used to not everything going to plan, so when we turned up to our friend James Cameron's place to film the 100 Year Old Dodge video it came as little surprise to find the car reluctant take us to the pub for our promised lunch.

Cue hours of disassembly, fettling and top quality MacGyver work to try and get the old girl running. ...

100 Year Old Dodge Touring Car.

Earlier this year - on a rare excursion from the shed – we visited James Cameron, the boss of armed forces charity Mission Motorsport to see his fabulous 1923 Dodge Touring Car. A century old but still clocking up the miles, this car is now a rare beauty. We chatted about his entry into petrol hedonism and his forays into motorsport alongside ...

High Performance Academy

Some of you guys have expressed an interest in the CAD course I've done with HPA. It occurred to me - thanks to one of you pointing it out - that we should do a tie-up with or Antipodean friends and we've now sorted it out.

There's something for everyone with courses on EFI tuning, Diesel tuning, fabrication and design, motorsport wiring, ...

BMW M50 Powered Celica

While Nik and Richard battled with Binky in the shed, Ben headed off to the spectacular Elan Valley in Wales to meet up with Daniel Railean. Dan takes care of all of BOM’s website and hosting through his own business but in his spare time, he’s been building his dream drift car – an RA40 Toyota Celica with the power of a BMW M50.
We kn...

Binky Update

Firstly, thank you for all your supportive messages since our last post, it's humbling and is massively appreciated. 

Secondly, taking on board some constructive criticism we'll be doing more regular updates just for you patrons and with that in mind, here's our Binky to-do list directly to your eyeballs from our whiteboard. 

Regrets - We've Had a Few...

What a rollercoaster of a last 18 months. If we had our time again, well...

If nothing else works, a total pig-headed unwillingness to look facts in the face will see us through. It's been a turgid time at our secret volcano lair; illness, stubbornness, Elliot Ness and others have seen what should have been the culmination of ten years eff...

The 2022 Silverstone Classic

Later than pla!nned, but better late than never, here's our shenanigans at the 2022 Silverstone Classic!

We were lucky enough to be invtited to shakedown a beautifully restored Tiga SC81 Sports 2000 car last year at Silverstone. This then turned into an invitation to race it at the prestigious Silverstone Classic event in late August 2022....

Yak shaving and the definition of finished...

How we laughed when the adage was thrown at us that the last 10% of a project takes 90% of the time. Well, we're not laughing now...

On screen, it's relatively easy to "fudge" a shot or a part to look like it's finished when in reality, it's anything but. And at the end of episode 38, the interior looked pretty much done except for the das...

We have a question for you.

First of all, thank you for the incredible reaction to episode 38, it's blown us away. As you might imagine, we were somewhat nervous about it. The more than 2000 comments is astonishing and that led to a thought.

It's impossible for us to reply to each question posed individually so we wondered if there might be an appetite for a follow...

Project Binky - Episode 38

Cor, yeah, long time coming but we changed round our anticipated releases to bring you episode 38 in April as promised. 

It was lovely to get back to creating content instead of creating headaches. I really hope you enjoy it, we enjoyed getting back to writing silly gags and whipping out the dad jokes along with some hopefully quite i...