HELLO EVERYONE!!!! Today I have for you!? the Fallout Laser Rifle!!!! And man, this one was awesome!!!! to start off, the test print went better than I was expecting! Though I did run into a few issues, and it has been an issue I have had with other high part count models, and that is the tolerances being too tight, but at the same time, not ti...
2025-12-20 15:23:31 +0000 UTC View Post
you can find the model here :D HAPPY PRINTING :D
2025-12-20 15:22:45 +0000 UTC View Post
Hello everyone!!! Today I have an update on the Fallout laser rifle!!! :D THE ADVANCED MODELING IS DONE!!! And I think I have gone a bit overboard with this one hahahaha. the internals are insane!!!!! with this model, you will be assembling?! the main laser emitter with the cooling system! magnetic accelerators through the main body of the model...
2025-12-12 12:19:26 +0000 UTC View Post
HELLO EVERYONE! Today I have an update on the laser rifle!!! :D and oooooooooo is this one looking gooood!!! :D First off, the basic modelling went great for this one! Thanks to its simpler boxy design, it didn’t have a ton of extreme rounded geometry! wooohoooo!!!
now for the fun stuff!!! the advanced modelling! for the internals, I go...
2025-11-19 16:10:46 +0000 UTC View Post
Hello everyone! Today I have an update for the lancer!!! new scope and shoulder rest!!! :D
also, you guys asked for a way to tension up the chain. It took me some time, but I found such a stupid, simple solution, I don't know why I didn't think of it sooner :D there is a new chain guard and front frames for the front idler, the frames ca...
2025-11-13 16:15:10 +0000 UTC View Post
IT'S BACK!!!!! After taking the model down due to fried electronics. With your help, Especially WeapwnX! you sir saved this model! ITS BACK!!!! WOOOHOOOO!!! XD now for a refresher on the models features!!!
this model has!!!
internals!!!
bolt together construction!!
outer plates that open up to reveal the internals!!!
â€...
2025-11-11 12:18:56 +0000 UTC View Post
you can find the model here :D HAPPY PRINTING :D
2025-11-11 12:18:31 +0000 UTC View Post
HELLO EVERYONE!!! sorry for the delay on this post, I had some pc issues! :D oooooooo you guys picked an epic model! THE NEXT MID-SIZED MODEL IS?!?!?! THE LASER RIFLE FROM FALLOUT!
This thing is gonna be so much fun to build as for features!?!?
it will have!
bolt together construction!
moving trigger!
removable mag!...
2025-10-29 18:36:42 +0000 UTC View Post
HELLO EVERYONE!!! Thank you so much for the ideas :D you guys came up with some awesome stuff!! :D
Some of the projects are a bit too big for this poll, so I will have them in the next poll :D
Now it’s voting time!!! :D I can’t wait to see what you guys pick!!!!
Some info about how the poll works, it is multiple choice, so...
2025-10-21 16:19:50 +0000 UTC View PostHello everyone! with the plasma pistol done! its time to vote on the next project! but before that! its suggestion time! Leave a comment below! I can’t wait to see what you guys find :D
2025-10-20 14:26:05 +0000 UTC View Post
HELLO EVERYONE!!!! Today I have for ya! THE PLASMA PISTOL!!!! its completed!!!! wooohooooo! and it’s turned out so well!!! this thing is epic!!!!! jumping right into the features!
we got!
removable mag!
internals!
bolt together construction!
LED lighting!
2 firing triggers!
rumble effects!
Light ...
2025-10-16 09:47:24 +0000 UTC View Post
You can find the model here :D HAPPY PRINTING :D
2025-10-16 09:47:02 +0000 UTC View Post
HELLO EVERYONE!!!! Today I have a more tabletop oriented model!!! STACKABLE! DISPLAYABLE! DECK BOXES!!! Originally used to carry all my decks for games in a huge 2000 plus card holder thing, which was awesome! but a pain to carry around! so deck boxes were a better idea, grab a box or two on the way out, and you are good to go :D
And then ...
2025-09-30 14:54:42 +0000 UTC View Post
you can find the model here :D HAPPY PRINTING :D
2025-09-30 14:54:17 +0000 UTC View Post
HELLO EVERYONE!!! Today I have an update on the plasma pistol!!! THE MODELING IS COMPLETE!!! and man, this one is looking epic!! but first the bad bits! sadly, with the electronics for this model, I wasn’t able to design as detailed internals as I would have liked, but I was able to include some cool bits under the main opening cover! :D BUUUU...
2025-09-26 13:09:20 +0000 UTC View Post
HELLO EVERYONE!!! Today we have something a bit out there! IT’S THE PARTICLE MAGNUM from Stargate Atlantis!!! this has been a model I have been eyeing for a bit, but haven’t been able to figure out some tricky bits on it! I FIGURED THEM OUT HAHAHAHA WOOOHOOO!!!!
to the features!!!!
moving trigger!
removable mag!
mag l...
2025-09-11 11:44:58 +0000 UTC View Post
you can find the model here :D HAPPY PRINTING :D
2025-09-11 11:44:26 +0000 UTC View PostHELLO EVERYONE!!!! Thank you so much for voting!! The next model is!!!!! THE PLASMA PISTOL!!!! from halo!!! And this one is gonna be fun XD this model is gonna be a good challenge as there is some tricky bits to figure out!! 1st off! The glowing ammo counter/Heat gauge hologram on the back is really tricky to make work! I have a few ideas on wha...
2025-08-29 14:58:24 +0000 UTC View Post
HELLO EVERYONE!!!! thank you so much for your suggestions! you guys have found some amazing models!!!!! now its time to vote for the next large project!!! :D
Some projects were too small, so they will be in the next poll :D
I can’t wait to see what you guys pick!!!!
Some info about how the poll works: it is multiple choice, s...
2025-08-20 12:59:30 +0000 UTC View PostHello everyone!!! With the epicness that is the Ar-23 done! It's time for the next poll!!!
but before that! its project suggestion time!! so if you have a project you want me to do? leave a comment down below and I'll research it :D
2025-08-19 16:45:56 +0000 UTC View Post
HELLO EVERYONE!!! IT IS COMPLETE!!! the AR 23 is finished!!! wooohooo!!! And man has this model turned out amazing!!! The features of this model just worked out perfectly! And the internals!!! they are so freaking cool :D
to the features!!!
this model has!!!
moving trigger!
removable mag!
clamp design, removable att...
2025-08-15 13:50:12 +0000 UTC View Post
You can find the model here :D HAPPY PRINTING :D
2025-08-15 13:49:48 +0000 UTC View Post
HELLO EVERYONE!!! today I have an update on the AR 23!! The advanced modelling is done!!!! woohoo :D And man, has this one turned out awesome!! :D
to the features!!!
this model has!!!
moving trigger!
removable mag!
clamp design, removable attachments!
bolt-together construction!
internals!!!
op...
2025-07-28 13:02:05 +0000 UTC View Post
HELLO EVERYONE!! Today I have an update on the AR23 :D The basic modelling is done!!! wooohooo!!! :D After completing the basic modelling, I realised this is a chunky model! I was expecting it to be closer to an SMG in scale, but it’s actually just a bit smaller than the DMR!!! This thing is gonna be so cool!!! :D to the features!!! :D This m...
2025-07-11 13:44:21 +0000 UTC View Post
Hello everyone!!! Today I have for you THE GOBLIN CLEAVER!!! from The Hobbit! continuing with the Lord of the Rings stuff with one of the coolest swords ever!!! :D That scabbard with its design that continues into the guard of the sword is epic!!!! :D
just wanted to say thank you so much, without you guys, this model wouldn't be possible! ...
2025-07-03 16:19:02 +0000 UTC View Post
You can find the model here :D HAPPY PRINTING :D
2025-07-03 16:18:42 +0000 UTC View PostHELLO EVERYONE!!! Thank you so much for all your votes!! You guys have picked!!!!!!!!! THE AR-23 Liberator from Helldivers 2! Man, this one is gonna be fun!!! I love working on bull pup style models!! :D
As for features!!! I might keep this a one a bit simpler than other models :D
It will definitely have!
Removable mag!
M...
2025-06-24 16:36:37 +0000 UTC View Post
hello everyone!!! today I have for you! A universal orange safety cap for props!!! so this model has been one of the trickiest things to make! Originally, I wanted to come up with a design that could pop on, pop off of any prop I design, so I started out with pressure clips! These would grab onto the inside of a barrel, this sort of worked, but ...
2025-06-20 16:50:54 +0000 UTC View Post
HELLO EVERYONE!!! Thank you so much for all your suggestions!! You are awesome!!! :D Some of the projects are a bit too big for this poll, so I will have them in the next poll :D
Now it’s voting time!!! :D I can’t wait to see what you guys pick!!!!
Some info about how the poll works, it is multiple choice, so you can vote for a...
2025-06-19 16:22:45 +0000 UTC View PostHello everyone!!! With the Brute shot completed! It's time for the next poll!!!
but before that! its project suggestion time!! so if you have a project you want me to do? leave a comment down below and ill research it :D
2025-06-18 13:52:38 +0000 UTC View Post