SamuKata
gamersnexus

gamersnexus

patreon


gamersnexus posts

GN Gear Loadout for Remote Coverage

Hey everyone! 

We’re finalizing our Computex coverage and we thought some of you might be interested in hearing about our equipment and how we operate on the ground in Taiwan.  

Our equipment setup is important for our work flow and keeping things efficient. Actually, our tradeshow coverage is where we’ve really do...

View Post

Patrons Ask GN Update - May 2025

Hey, everyone!

I've never tried this before, but decided to just upload the video straight into Patreon. Hopefully it handled it OK. After the upload, Patreon yelled at me to use a lower bitrate and resolution next time. If it's no good, we'll upload it to YT unlisted instead.

We have a new Patrons Ask GN episode. Since this is the f...

View Post

Updates! Cooler bench overhaul & moving to X3D

Hey everyone!

We wanted to give you all an update to the behind-the-scenes progress on our lab and testing overhauls for the past month. Our big video projects were the Thermal Grizzly factory tour and the Tariffs documentary, but in the lab, we’ve been working on totally reworking our testing for coolers (again!).

Over the last fe...

View Post

Overhauls & Upgrades! Fan Tester, GPU Benches, CPU Benches

Hey everyone!

I've been compiling a big list of overhauls and upgrades we're making lately behind the scenes. We're filming some of them, but lots of it is just never going to be shown (besides getting used in video), so I thought I'd share it here since it won't be anywhere else.

List below as we set up for next year!

...

View Post

Some Incoming Website Overhauls

Hey everyone,

I just wanted to update you all on some of the stuff we're working on outside of the main YT channel!

First up, we've been continuing to bring content to the website since we re-launched it in November of last year. I think we just got around to getting all the Zen 5 reviews published in written format. If you're not fa...

View Post

Behind-the-Scenes: Intel Report

Hey everyone - (and probably Intel PR!)

We have been working on a report diving into more of the Intel failures. The story has been covered to death on the technicals and possible causes, so what we are working on currently has more to do with Intel Corporation's actions historically to these types of situations. I thought I'd give a previ...

View Post

Big CPU Cooler "Mega Charts" update

Hey everyone,

We've updated the Mega Charts for CPU coolers on the website! This is the first major update since we launched these pages in December of 2023. You can find the Mega Charts overhaul for CPU coolers here:

https://gamersnexus.net/megacharts...

View Post

Massive Bench Overhauls & what we've been up to

Hey everyone,

We've been grinding away at the benches lately! I'm not sure how obvious it's been externally, but production volume has been way up and we've really been getting to work on the deep-dive content.

Other than the various investigations, we recently published an ITX case review, two ATX case reviews, the NH-D15 G2 review,...

View Post

Patreon Bonus: GPD Win 4 2023 Early Thoughts & Initial Testing Process

Patreon Bonus: GPD Win 4 2023 Early Thoughts & Initial Testing Process

Hey, everyone!

If you saw our recent ASUS ROG Ally review, we've really had a lot of fun beginning work on handheld reviews. This has furthered a few things outside of handheld testing for us: First of all, it's served as a really controlled use case for our acoustic chamber, so we've had a smaller list of devices that are much simpler to ...

View Post

Patrons Ask GN: EVGA Questions, ASRock "Lite" Motherboards, RM600

Patrons Ask GN: EVGA Questions, ASRock "Lite" Motherboards, RM600

Hey, everyone! Here's that Patrons Ask GN we mentioned recently on the Patreon Discord and in HW News! I just spent the last 2 weeks editing that AMD lab tour video, so got backed up!

TIMESTAMPS

00:25 - The Future of EVGA?

05:25 - GN Recommended Charities?

06:24 - Silverstone RM600 Build?

07:30 - Lite ASRock Boards?...

View Post

7800X3D Super Hi-Res Electron Microscope Shot

7800X3D Super Hi-Res Electron Microscope Shot

Hey, everyone!

Simple post here. The Failure Analysis lab we worked with just sent us a super high resolution Scanning Electron Microscope shot of the Ryzen 7800X3D. It's specifically the cross-sectioned CCD that we showed in our video (already live on the public channel: 2023-05-13 23:34:12 +0000 UTC View Post

Installing Rails to the Ceiling | Studio Upgrades

Installing Rails to the Ceiling | Studio Upgrades

Hey, everyone!

This video is unique! Vitalii and Andrew took turns following Mike around during a few of his work days over the past few months. You get to see what his work day looked like as he designed, built, and installed a rails system to our ceiling for lighting and camera equipment. It's one of the best upgrades we've ever made, an...

View Post

Steve & Mike Making Stuff Happen - Behind-the-Scenes

Steve & Mike Making Stuff Happen - Behind-the-Scenes

Hey, everyone! 

This video features both Mike & I walking through the studio and showing a few things we don't normally show. One of them is our new camera organization we've done in the closet. We don't have a lot of camera gear compared to some other YTers (mostly because it's simply not our focus), but the stuff we have needs t...

View Post

Website Rebuild, 24/7 Bench Operation, & Upgrades

Hey everyone,

We just stacked-up about 6 videos, so we're finally at full production after an extended 3-week period of internal operations improvement. I loved the time away from production we had to just make things even better, and the team is feeling fresh and excited to get going on the upcoming X3D parts. Not to get too deep into the...

View Post

GPU Die Lapping with EVGA's Overclockers

GPU Die Lapping with EVGA's Overclockers

Hey, everyone!

Thanks again for your continual support as we get more into field reports like the big EVGA video on the main channel! I spent a few weeks personally editing it -- the plan is to pass that work off to editors later, but I had to figure out how the storytelling process works with that much footage before I could even begin to...

View Post

Our Alternating Improvement Schedule

Hey everyone,

If you missed it, check out our 2023 plans here! https://www.patreon.com/posts/76702217?pr=true

This is something we've talked about indirectly before, but never directly. I wanted to write a quick behind-the-scenes on some stuff comi...

View Post

Mega Post: Big Plans for 2023!

Hey everyone,

I wanted to write an exclusive Patreon update now that we're clear of the major launches for the past few months. This will give you some behind-the-scenes on what we're working on!

Reporting & Journalism Pieces ("Features")

My personal ambition this year is to really kick-up the reporting and...

View Post

Organizational Tools, Storage, PCB Racks, & More!

Organizational Tools, Storage, PCB Racks, & More!

Hey everyone!

First: Check out a megapost we wrote with updates on the team, the studio, our ambitions for 2023, and more! https://www.patreon.com/posts/76702217?pr=true

We've finally resolved our staffing shortage! I mentioned this a few months ba...

View Post

Paradigm Shifts that have Grown GN

Hey everyone,

I wanted to write an update to you all about the flow of GN's work right now and some behind-the-scenes stuff.

Some of you might remember that, a few months ago, we took a couple weeks off from heavy publishing and pared-down to about 1-2 videos per week. We were still working in that time, but I mentioned in the public...

View Post

What We've Been Working On

Hey everyone!

As you all may know, we recently took a couple weeks of break from working on / publishing big technical pieces so we could refine processes. We keep working during that time, but normally I give the team 5 days off so I can just tie-up loose ends and build some processes for new work going forward. I have to do this 1-2x per...

View Post

Big Internal Improvements & Cleaning the Sound Chamber

Big Internal Improvements & Cleaning the Sound Chamber

Hey everyone,

We took about 2 weeks to sort of work behind the scenes on a number of things. Those include me personally going through hundreds of hiring applications (took quite a while), working on SOP writing for our testing processes, smoothing-out our project tracking software, and other internal stuff. Basically, a couple times a yea...

View Post

GN Office Improvements & Setup

GN Office Improvements & Setup

Hey everyone!

This is a fun video for you all and should give a unique behind-the-scenes look that we haven't shown before. This video features Mike showing the facilities overall, some improvements he's made, and some parts of the building we have never shown before, like the (small but effective) on-site gym we're working on as a perk fo...

View Post

Simple Cable Management & Some Updates

Simple Cable Management & Some Updates

Hey everyone!

This one will be a written post + a simple video. The video is just a simple cable management video. If you like seeing messy things become clean, you'll like it. The writing will share some behind-the-scenes updates I've been working on.

GN Extras

First up: We just published a public video on GN ...

View Post

The Noisy Battle with Test Consistency

The Noisy Battle with Test Consistency

Hey everyone!

Here's another video with Mike on the testing team. This was actually shot before our sound chamber's arrival, but the testing laid-out here is still used (currently) for all noise testing. This mostly gives some small insights to the unique challenges we face when trying to control the environment for test quality and data a...

View Post

Advancing Our PSU Testing Procedures

Advancing Our PSU Testing Procedures

Hey everyone!

Quick heads-up first: We just sent out the Patreon reward tiers for part of January + February, so you should get shipping emails in the next few days if you've been waiting for one.

This video has Patrick Stone from the team running through some new testing procedures for the power supply test bench. We're excited to u...

View Post

Patreon-Only Walkthrough & Cabling of Fan Tester

Patreon-Only Walkthrough & Cabling of Fan Tester

Hey everyone!

We have two parts for this - both are Patreon-exclusive. Thanks so much for all your support and making it easier for us to buy this stuff (and also to remain independent of ads we don't like).

This video goes over some of the fan tester connections. It's very casual and totally unscripted. You'll see another one with S...

View Post

Temporary Acoustic Chamber Build (Patreon Behind the Scenes)

Temporary Acoustic Chamber Build (Patreon Behind the Scenes)

Hey everyone!

We recently built a temporary acoustic testing 'chamber' to bring noise levels down to our baseline from the old location. We had an interesting challenge: Don't make it too good. It'd be easy to make this setup much better, but we actually don't want it to be better than the old location (yet); we want something that matches...

View Post

GN Server Room Behind-the-Scenes

GN Server Room Behind-the-Scenes

Hey everyone!

This is just a behind-the-scenes video from the new place. This accompanies our next public video, which is basically a tour pre-moving of the office. This BTS video shows the server room and talks about some of Patrick Stone's quick contributions to keep the project rolling.

View Post

Patrons Ask GN: Disappointment 2021? TDP vs. Power?

Patrons Ask GN: Disappointment 2021? TDP vs. Power?

Hey Everyone,

This was our last set of videos we filmed at the old studio (I think -- or mostly, maybe one or two more will filter out). We have some moving vlog stuff, but I'm not counting that in the tally. We are running a new public Ask GN, the final of the old studio and likely of the year, and a new Patrons Ask GN here.

As alwa...

View Post

GN Server Maintenance & Upgrades (Behind the Scenes)

GN Server Maintenance & Upgrades (Behind the Scenes)

Hey everyone,

We've been in the new space since the Alder Lake reviews! In between reviews, we had a few hours where the editors were out of the office, and so that gave Stone a time to take the server offline and upgrade the RAM and clean the dust. We needed some extra capacity for all the work we're doing lately. This is basically just a...

View Post