Hello everyone! Lately I have been somewhat disconnected, many of the new members have not received any welcome message, sorry.
This is actually due to a future change in my life that has forced me to start a lot of tasks that prevent me from keeping up with the patreon and its deadlines. For the more insightful, yes we are pregnan...
2023-07-24 19:20:41 +0000 UTC View Post
Hey guys, it's time to decide if we start a new set. This year between the lengthening of the dwarf set, the kickstarter and many loose models and extra pieces of old sets, not too many complete sets will have come out. So it's time to choose...
2022-08-28 16:30:28 +0000 UTC View Post
Hi guys. I don't usually do promotions or personalized orders because I don't have time, between Patreon and what's pending on Kickstarter, it's usually impossible for me. But when your favorite minis designer, Artisan Guild asks you to cross-promote, you just can't say no XD.
So I've been working a little harder than usual to get this mod...
2022-08-27 21:52:37 +0000 UTC View Post
Hello! As you may know, I've been working on a Kickstarter campaign for years, before the patreon and even before starting doing free models in thingiverse and, and it's finally finished!! OMG I'm really tired of this proyect, too long. My intention is to publish it this Saturday July 9th and here is the link to the campaign page that is current...
2022-07-07 11:12:56 +0000 UTC View Post
Hi all! Finally I got some time to finish the chests collection (the original chests were 4 but I didn't like one of them so now the collection is just 3 chests XDD).
So here you have it, the last one and my new favorite one. As the other ones you can use the same lock mechanism, but the key needs to be a little bit longer. Also I've added...
2022-03-22 17:56:29 +0000 UTC View Post
Hi all! While I manage to do the next model which I'm not really sure about what to do, here you have a fast model I made just to do something while I clarify with the new model. So, now that is done, enjoy the model. It the waygate from the amazon prime series based on the wheel of time book.
It's been a really fast to do model, even more...
2022-01-18 18:55:45 +0000 UTC View Post
Hi, first post of the year! We are starting again some random buildings before choosing the next set. So this time you have a dwarf house. I've separated into 3 pieces yo be able to have a flat roof. Hope you enjoy this house. I've also made a non floor version of the base for those who don't need the interior and want to save material and time....
2022-01-15 14:38:23 +0000 UTC View Post
Hi guys! I know I'm a few days ahead of time, but I wanted to make your holidays a little bit cheery! I have managed to find time this month to do something different and special to end the year in addition to the models that I am already making regularly.
Ironically, it took me longer to paint everything than to make the models. I do not ...
2021-12-23 17:01:15 +0000 UTC View Post
Weeee!!! We have finally reached 200 members, thank you very much to all of you! I really did not believe that we would get to be so many when I started this patreon and less in such a short time. I am very grateful to you and I hope you continue to enjoy the models that I am making.
This month, in addition to the pieces of the set, I...
2021-08-26 13:52:53 +0000 UTC View Post
Hello, as a parton suggested to me, we have a kind of Viking house. I wanted to avoid the typical triangular house and try to make a more rounded one inspired by their boats. I hope you like it, it has 3 pieces, the floor, the ceiling and the door. And no, I didn't paint the inner part of the ceiling, but you can do it XD.
As this month I ...
2021-07-21 18:26:37 +0000 UTC View Post
This time I had time to make the models, paint them and take the photos before the end of the middle of the month !! Also, since I'm on vacation, I have almost finished the next model.
In this case it is a modular bridge with its normal size version and another super wide one for those of you who play classic warhammer and have to move lar...
2021-07-14 19:54:12 +0000 UTC View Post
Hi! Had some troubles with the attaching holes between the island and the base, but now it's all fixed and it attaches really well. Here you have the dark elves floating island hehe. So you can have both. Since I had to do some tests to see how the pieces painted looked, I also made a single floating pillar (yes the file is "pilar" sorry fo...
2021-06-22 20:19:32 +0000 UTC View Post
Hi all! I had the base for one more chest so while I'm finishing the next scenery model I decided to finish first this chest that should be the first one to make a remake. I plan to make 3 of them to complete the set and this one should have been the first one, not the second XD...
So here you have it, you can use the same lock mechanism and ...
Hi! Lets start with the new set. I have to admit that this two week I've done very little work on the patreon models (bought a new resin printer, first one, and had to print a lot of things and paint some minis... I barely remembered how to paint something other than scenery >_< )... But here you have the first model of the set, a broken r...
2021-04-14 21:14:51 +0000 UTC View Post
Well, it was a pretty close poll, I even think there was a time with a triple tie. Finally two were tied so I used my vote to untie and opted for the set that had been going the longest. Even so, the fact that the votes are so distributed makes me think that you like all three, so I'll see if I do them all in order or I will generate more random...
2021-03-30 18:01:45 +0000 UTC View Post
Hi! I finally finished printing the whole piece and it works fine !! This time I made a floating elf island ... maybe because this month GW will release a new Aelves scenario? Okay, yes!!
It's been a really difficult piece to design and it took me longer than I expected, but it's finally done. It is also the first piece where you will need...
2021-03-24 18:37:10 +0000 UTC View Post
Hi all! As suggested again from one of my patreons, this time is a small orc cottage. I've splitted the model in two pieces so you can play the interior. As always without support and printable in a 20x20 printer. It was an easy piece to make but I took the time because I'm making at the same time the next piece which is a little bit more compli...
2021-03-09 21:51:55 +0000 UTC View Post
Hi all! Even when I was not sure if you wanted another chest, I wanted to try making a lock system no to hard to assemble so I could make a usable chest for dices or whatever you wanted. And I have to say that I'm very happy with the result and probably will keep the chest on my desk forever!! Love to see it and love to open and close it like a ...
2021-02-09 13:02:31 +0000 UTC View Post
Hello everyone, we have finally reached 50 patrons, and our second set is completed. The last one took me a all of my free of time, but I'm very happy with the result. Now I'm trying to convince some friends to start a modheim campaign to use the set! 2021-01-22 18:22:32 +0000 UTC View Post
Hello people! We started new set of pieces, this time the winner of the poll was the ruined town! Just like last time, I'll be doing 4 parts of the set, which I hope didn't take more than the usual two months, I've been having a crazy few weeks lately and I also don't want to delay the dice chest too much.
As the first part, we have a two-...
2020-11-09 22:01:03 +0000 UTC View PostHi all. I've created a discord server and provided you permision to the #patreons channel in order to keep you informed about news, model updates and all kind of information related to the patreon. Also you can use the channel to make suggestions, ask for particular models, give me feedback opr talk about you want related to the patreon ;) ...
2020-09-28 17:28:33 +0000 UTC View Post
Hi all! As I probably told you on message when you started to suppor this project, I want you to feel free to ask me if you want a particular piece of scenery and I'll try to do it. By the time I have only received a single specific request to create a piece. This is an Eberron creation forge for Dungeons & Dragons campaings (at least if you...
2020-09-03 18:24:25 +0000 UTC View Post
Hi all! We have the second modular piece of our dice battlefields, the orcish watchtower. I'm printign it right now, so you can wait until I've printed and painted it to see if you like it more than the humans one in case you only wanted one. Menawhile, here you can download the model, both tower aolone and tower and tray together. I will ...
2020-07-07 18:37:55 +0000 UTC View Post
Hi all! Now that the Lumineth are coming to Age of Sigmar, what better than to take out an elven waystone to celebrate it. One of the first pieces of scenery I had for my High Elves. Now with more detail and adapted to the new lumineth but without losing the charm of the classic waystone.
Also I have used this model to do test...
2020-06-27 08:52:17 +0000 UTC View Post
Hi all. Finally we can release the first pieces of the little project we are starting. This is a new modular system that combines a dice tower and a dice tray where you can join two towers or just one so you can use it alone or with your opponent. At the moment we have only one tower model (the human castle) to combine, but we want to release mo...
2020-06-03 16:10:18 +0000 UTC View Post
Hi all. We're excited to anounce a new colletction of models we are wroking in. It's the result of joining two concepts, the dice towers and the dice trays, what we call "Dice BattleField". Also, we wanted a two player tray so each player has his own tower amd both players dices fall in the same terrain, so it uses a modular system so you can co...
2020-05-19 09:41:49 +0000 UTC View Post
As our commitment to creating free stage content and other resources for 3D printing is growing with each new model we upload, we have created a Patreon page to help this project continue to grow.
You can check our latest release at: https://www.thing...
2020-05-18 15:52:05 +0000 UTC View Post