nicFW 880 BETA 02 Release
Added 2025-09-19 05:48:54 +0000 UTCπ’ DTMF Decoding
Decoded DTMF digits now temporarily replace the Group Name on screen.
The existing βDTMFβ menu category has been expanded with additional options.
Options include:
Decoding
Off β No decoding
On β Enable decoding only
P-ID β Match heard sequences against presets and display their names
Display For β How long (in seconds) detected digits are shown
SeqEnd Pause β Pause (in seconds) after a detected digit, marking the end of a sequence
β‘ DTMF Preset Speed Dial
A new User Key function: βDTMF Speed Dialβ
Assign this to a key, and long-pressing it will transmit the corresponding DTMF preset.
Example: If LP-2 is set to DTMF Speed Dial, holding 2 will transmit preset #2.
π» Si4732 Tuner Module
New function selection menu added.
β οΈ Important: Key definitions for this module have changed.
Short Press Keys
EMG β Toggle Day/Night display
*/# β Adjust BFO
0β9 β Enter frequency
Up/Down β Step VFO frequency / channel number / seek direction
Green β Open Main Menu
S1 β Change Band
S2 β Change Modulation
Red β Toggle VFO/Channel mode
Long Press Keys
1 / 3 β Seek Down/Seek Up
2 β Reset BFO to 0
4 β Enter new frequency step
5 β Toggle S-Meter (reduces interference)
6 β Toggle squelch (WFM only)
7 β Enable/disable scope (>18 MHz, dual antennas required)
8 β Toggle power line filter
9 β Toggle AM bandwidth
Red β Exit tuner mode
Green β Function list selection menu
π°οΈ GPS
A new User Key function: βGPSβ has been added.
Currently, itβs a diagnostic tool that displays:
Latitude / Longitude / Altitude
Satellite count
Speed & heading
Time
nicFW880 BETA 02A, GPS Module Update π
GPS Compass mode
Real Time Clock, check the "Time" menu category.
Velocity can now be displayed in knots, mph, or kph
Handy key controls when GPS is active:
π΄ RED: Exit GPS module
#οΈβ£ #: Toggle raw data β compass mode view
β΄οΈ *: Switch between cardinal rotation β pointer rotation
9οΈβ£ 9: Cycle through knots β mph β kph
nicFW880 BETA 02B
Fixed Settings saving problem.
Coming soon π
GPS targets & tracking
Save your current location as a target
Transmit your location to another radio (via DTMF)
Radar-style target blips
Comments
Another small issue, if when transmitting you press a button to send a DTMF or repeater tone, if you release PTT before the other key, squelch gets stuck open and the key's RX based function is executed.
Marcus Dudley
2025-09-22 12:38:01 +0000 UTCBETA02A seems as though settings aren't saving. Am investigating
Marcus Dudley
2025-09-22 09:27:28 +0000 UTCThe squelch on the Si4732 is based on the chip itself, you either turn it off or on, there's no real settings for it.
Marcus Dudley
2025-09-22 09:10:25 +0000 UTCI'm testing BETA02, and it looks stable to me. Everything is working fine so far. I'm not sure how the squelch is working for SI4732βis it possible to adjust the squelch, or is it only one setting (which is also fine)? From the RMS, I was also testing all tabs; there are no issues so farβI even saw and tested the scrambler per channel, which is also working fine (please remember about this feature for H3 - if you find time, of course). Thanks, Marcus!
Rafal Nowak
2025-09-22 08:17:23 +0000 UTCAll issues must be reported following this: https://www.patreon.com/posts/reporting-issues-138110232
Marcus Dudley
2025-09-22 07:52:00 +0000 UTCWhen I switch to SI4732 on SSB, the radio goes silent. RT98
Piotr Jurewicz
2025-09-20 21:22:26 +0000 UTCWhat a king.
Valter Medeiros
2025-09-19 10:08:36 +0000 UTCThe Red LED lights up when GPS is active, this was debug code I forgot to remove. It won't do this in future releases.
Marcus Dudley
2025-09-19 07:48:47 +0000 UTCThanks to Marcus for starting work on the GPS; I think it's going to be a challenging step. Since the DTMF function has been perfected, could someone explain how to use it? I'm not very knowledgeable about the subject; I've seen something online, but a more specific guide for the RT-880 and the Nisure firmware is needed. A video tutorial from Marcus would be great!
I5EKX
2025-09-19 07:12:17 +0000 UTC
