Exclusive: Flexi Factory Mini Skeleton Crocodile with Keychain and Magnet Versions!

Mini Crocodile is here!

I know some of you less familiar with my minis will ask "isn't this just your classic crocodile scaled down?" Heck NO! If you tried to print the regular crocodile small, the links would be teenie weenie, and super fragile. This one has beefed up hinges and is adorable.

I made 4 versions:
- Standard
- Keyring
- Captured Magnet (Recommended)
- Non-captured Magnet

For the Captured magnets use
6x2 magnets at 100% scale
5x2 magnets at 85% scale.

For those of you that have never tried captured magnets, I made a quick tutorial.
(The tutorial is for Bambu Slicer, but should translate to other slicers.)

Captured Magnet Video Tutorial Here: https://youtu.be/kDyoTGOxb5g?si=DBU4nTZLR_tXcG2Y

Print tips and Info:

• STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

• I print with, 15% infill/gyroid, .12 or .16 layer height for quality.

• As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

• I successfully test printed between 70% and 200% for this design. They were built to be small with beefy joints and ribs.

• Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List

• 85% can use a 5x2 magnet and 100% uses a 6x2 magnet. Both are here: https://amzn.to/3D5DT88

• 1st photo has 100% STL and 3MF: Bambulab White Marble , Amolen Dark Wood gradient (Tree) and Yellow Feldspar , Ziro Peach Sunrise, Beach, Tropical and Meadow Mirage Matte

• 2nd photo 70%, 100% and 150% STL: TTYT3D Fast Change Rainbow Silk

• 4th photo STLs 125%, 70%, 50% : Ziro Meadow Mirage, Beach and Peach Sunrise

  5th photo 100% 3MF: Cookiecad Unicorn, Amolen Yellow Feldspar and Bambulab White Marble

Happy Printing -Dan

*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) To join discord, go to your settings under Apps and connect.

  Monthly Downloads and BONUS Files can be found here: DOWNLOADS  

 All of my Public Releases that are not included this month can be purchased on My Mini Factory or Cults 3d with the 40% off code. See this post for more information: DISCOUNTS  Past Exclusives can also be found in this tab. Individual discount codes to buy for $3.99.