7200 CL34 2x16GB Hynix 16Gb M-die on MSI Z790i EDGE
Added 2023-04-10 15:15:38 +0000 UTCCPU: i5 13600K @stock E-cores off
Cooling: fan pointed at RAM, Asetek 240mm AIO
mobo: MSI Z790i EDGE
BIOS: E7E03IMS.130
RAM: 2x16GB Kingston Fury KF560C36BBEK2-32 (single rank Hynix 16Gb M-die)
RAM / IMC voltages
VCCSA: 1.2V // upto 1.45V is safe
VCCIN: 1.8V (AUTO) // upto 2V is safe
CPU VDDQ: 1.4V // upto 1.45V is safe
CPU VDD2: 1.4V // upto 1.6V is safe
RAM VDD: 1.45V // upto 1.6V is safe
RAM VDDQ: 1.45V // upto 1.6V is safe
RAM VPP: 1.8V (AUTO) // upto 2V is safe
PLL voltages:
CPU core PLL: 1.020V
RING PLL: 1.020V
SA PLL: 1.020V
MC PLL: 0.990V
Other settings:
Round Trip Latency mode: Dynamic
Round Trip Latency: Enabled (can be impossible to stabilize on some CPUs)
Late Command Training: Disabled
Power down mode: Disabled
RAM speed and timings
Speed: 7200Mbps
PRIMARY TIMINGS----------------------------------
tCL: 34
tRCD: 44
tRCDW: 16
tRP: 44
tRAS: 28
tCR: 2T
SECONDARY TIMINGS-------------------------------
tCWL: 24
tRRD_L: 8
tRRD_S: 4
tFAW: 16
tRFC: 333
tRFCpb: 222
tREFI: 50 000
tXP: 4
tCKE: 4
tRDPRE: 8
tWRPRE: 48
tPRPDEN: 2
tRDPDEN: 4
tWRPDEN: 4
TERTIARY TIMINGS-----------------------------------
tRDRD_sg: 14
tRDRD_dg: 8
tRDWR_sg: 20
tRDWR_dg: 20
tWRWR_sg: 12
tWRWR_dg: 8
tWRRD_sg: 64
tWRRD_dg: 48
any timings not listed above should be left on auto.
Stress tests passed
1000% HCI memtest
7200+ seconds of Y-cruncher VST
Testmem5 1usmus_V3 x60 (5hours 22minutes)
Comments:
CPU provided by intel
Thanks to the channel's supporters for the funding the motherboard and RAM
Comments
depends on the CPU. Some CPUs work best with default PLLs others don't work above 6800 without changing the PLLs.
Actually Hardcore Overclocking (Buildzoid)
2024-02-18 01:28:08 +0000 UTCis it nessesery to mess with pll voltages is that important (can they be on auto)
HanVengyy
2024-02-18 01:24:42 +0000 UTCGood deal. I’ll slowly start upping them to see if I can get it stable. Thanks again for all you do
Kevin Crooks
2023-04-14 20:19:47 +0000 UTCanything less than 150 should be safe. However optimal settings can be anywhere from 0 to 150 depending on CPU
Actually Hardcore Overclocking (Buildzoid)
2023-04-14 19:03:37 +0000 UTCGotcha. I got all 4 set to 120. What’s considered safe on those voltages?
Kevin Crooks
2023-04-14 14:57:13 +0000 UTCtry fiddling with PLL voltages since they are CPU specific and your CPU probably needs different ones from mine.
Actually Hardcore Overclocking (Buildzoid)
2023-04-14 14:55:30 +0000 UTCReally awesome write up! I tried these same settings with same mobo, 13900k, and 16gb x 2 gskill 7200 Hynix a sticks. Still not stable at 7200 but closer than before. 6800 is max I can get stable. What can I change to help maybe get this stable?
Kevin Crooks
2023-04-14 14:54:03 +0000 UTCI have a 13600KF but I suppose the voltages and timings would be different at 6800. I’m not good at all at that kind of stuff 😁
KaiserAlucard
2023-04-13 20:03:35 +0000 UTCwith a 13th gen maybe but 6800 is a safer bet
Actually Hardcore Overclocking (Buildzoid)
2023-04-13 20:00:16 +0000 UTCI have an Asus Tuf Z690 Plus, you think it has what it takes?
KaiserAlucard
2023-04-13 19:21:36 +0000 UTCyes but I'd expect a lot of Z690 boards to struggle to reach 7200
Actually Hardcore Overclocking (Buildzoid)
2023-04-13 19:20:27 +0000 UTCCan these be used on a Z690 motherboard?
KaiserAlucard
2023-04-13 19:06:01 +0000 UTC
