OSR2 PTFE T-wist Receiver
Added 2021-06-29 17:34:27 +0000 UTCRequired: 350mm+ (14 inches+) of 4mm outer diameter PTFE tubing.
Commonly used with 3d printers, called bowden tube. You probably shouldn't cut your printer's bowden tube for this.
See the SR6 version build video if you would like more information: https://www.patreon.com/posts/52517834
This zip contains:
PTFE Cut Jig: 27point4mm PTFE Cut Jig.stl
Body: OSR2 T-wist Body PTFE v2.stl
Base: OSR2 T-wist Body PTFE v2.stl
Bumper: OSR2 T-wist Bumper PTFE v1.stl
Spacer (OPTIONAL): OSR2 T-wist Spacer PTFE v1
I design around 0.2mm layer height and 0.4mm nozzles. Many other configurations may work, but if you have issues, I recommend trying the above. Print on the smoothest build surface you have available, glass or PEI sticker is ideal.
I recommend PLA for all of these parts.
The bumper is optional but HIGHLY RECOMMENDED. Attaching it with superglue or epoxy then lightly sanding it (if necessary) gives the receiver a much more comfortable feel.
You are responsible for your own safety. You are forcing plastic twice the temperature of boiling water out of a robot to make parts for another robot that will be manipulating the one human genital you will ever have. Keep that in mind and be careful.
All parts in this release are recreated referencing Tempest's designs then modified by me.
(i guess technically the bumper is original lol)
SR6 info: https://www.patreon.com/tempestvr/
