![[Exclusive] popsicle magnets plus case](https://img5.samukata.com/storage/5/du/hf/4e9b88-019e8263-4e91-7890-8f6b-29c0571ac3e3.jpg)
![[Exclusive] popsicle magnets plus case](https://img5.samukata.com/storage/2/ai/xa/4e9b88-019e8263-4e98-77dd-92da-8a39867d6ae8.jpg)
![[Exclusive] popsicle magnets plus case](https://img5.samukata.com/storage/10/fv/zd/4e9b88-019e8263-4ea2-7c51-8809-20da42d41fdc.jpg)
[Exclusive] popsicle magnets plus case
Added 2024-05-29 15:57:28 +0000 UTCSqueezing this small release in before the end of the month! I've had requests for magnet version of the popsicle, and I made them a little case to go in!
I've included two versions, one with cheeks one without, and a 3MF version.
The magnets are captive, which means that they don't need to be glued in and are inserted during printing. You will need to pause the print at layer 21 when using 0.2 Layer height, then insert the magnets and resume printing. Magnet size is 5x3. I have included this information in the magnet guide as well!
If you don't have a magnetic plate, please don't print this version.
This is a patreon exclusive release. Patrons can download it free from the patreon exclusives link in the download post!
-----> Current download post <-----
š¤š¤š¤
Comments
I am trying a print with larger magnets in the case. Hope it works.
Kim McKenzie Knittig
2024-06-19 05:30:09 +0000 UTCFor sure! Go for it!
Christine
2024-06-01 19:27:41 +0000 UTCAre we able to attempt to edit the file to try to put magnets in the holder?
Harry Henze
2024-06-01 19:12:51 +0000 UTCš«¶š«¶
Christine
2024-05-30 16:05:13 +0000 UTCJust when I think you can't out cute yourself you come up with this! <3
Amy C
2024-05-30 15:06:11 +0000 UTCIts not unfortunately, its a bit heavy and would need a lot of magnets in order for it to stay put with the pops in it
Christine
2024-05-30 02:22:34 +0000 UTCIs the holder also magnetic?
Sarah Hovick
2024-05-30 01:52:09 +0000 UTCOK, I googled is the magnetic build plate the plate that comes with the new Bambulab printers just double checking
Jana Barroga
2024-05-29 21:06:36 +0000 UTCI believe all bambu lab printers come with a magnetic plate, you can test before you print by placing your magnets on your build plate to make sure they stick š„°
Christine
2024-05-29 21:02:37 +0000 UTCdo you have a link to buy a magnetic plate? I have a1, p1s and a1 mini
Jana Barroga
2024-05-29 20:57:36 +0000 UTCHii! I used these https://www.amazon.ca/dp/B09CNJ4GN8?psc=1&ref=ppx_yo2ov_dt_b_product_details Just beware that this is an Amazon. CA link
Christine
2024-05-29 16:59:25 +0000 UTCSuper cute!
Melissa Chamberlain
2024-05-29 16:47:09 +0000 UTCI love this!!!
Paradoxal_Dinosaur
2024-05-29 16:35:02 +0000 UTCWhich magnet brand did you use?
Arch Vcx
2024-05-29 16:34:45 +0000 UTCIf you have a magnetic bed the magnets will stick to your bed and should not stick to the nozzle regardless of what type it is š„° I printed mine with a steel nozzle!
Christine
2024-05-29 16:26:08 +0000 UTCWill this print with a steel nozzle or will that mess up the magnet ?
Bethany McClure
2024-05-29 16:24:15 +0000 UTCHmm okay, fair enough. I need to print these!
Julie Fernandes
2024-05-29 16:18:05 +0000 UTCIts not unfortunately, its a bit heavy and would need a lot of magnets in order for it to stay put with the pops in it
Christine
2024-05-29 16:15:27 +0000 UTCADORABLE!!!! Ok fine ill print a few hundred. :)
James [bucklenshackle] šØš¦
2024-05-29 16:11:38 +0000 UTCAbso-freaking-lutely adorable. Is the case magnetic too?
Julie Fernandes
2024-05-29 16:09:26 +0000 UTCToo cute!!
Channie
2024-05-29 16:09:25 +0000 UTCThankyou for adding the layer that we need to pause it at it really helps
Andrewcooke
2024-05-29 16:06:18 +0000 UTCyep š„°
Christine
2024-05-29 16:02:13 +0000 UTCAdorable! Do they fit in the case if they have the cheeks?
Ellyn Stephens
2024-05-29 15:59:58 +0000 UTC
