Cnidarian Fire Dispensers (Supported)
Added 2022-12-07 02:00:20 +0000 UTCThe Cnidarian Fire Dispensers pre-supported in 5 poses.
Gallery here: https://cults3d.com/en/3d-model/game/cnidarian-fire-dispensers
Update (12/9/2022): I've added FLMR5 to the file list. This pose can be kept at 100%. No scaling will be needed if you wish to match the official kit.
Update (12/11/2022): All poses have been given Ball & Socket joints for connecting them to their Fire Plume Bases.
Update (2/27/2023): There is now a separate set for the Cnidarian Fire Dispensers. This was done due to the frequent reports of print failure when reducing the original set given to 70% as recommended. FLMR1-FLMR4 have been re-supported and exported once again, and you can now find a second folder in it's archive containing these four with new supports, reduced to 70% of their original size. FLMR5 shall still be the same.
Comments
Thanks for rescaling them!
2023-02-28 19:23:47 +0000 UTCTHANK YOU!
Andrew Dipsell
2023-02-28 00:27:03 +0000 UTCFor FLMR1-4, you will need to scale down to 65-70% to get close to the official kit's sizing. This was verified by several other patrons testing different sizes on their own. To alleviate the issue, I've added FLMR5 to the file list. This pose is proportioned differently so that it can be kept at 100%. No scaling needed if you wish to match the official kit.
2022-12-11 18:23:20 +0000 UTCWill the 1-4 need to be rescaled?
Zachary McCormick
2022-12-11 04:51:48 +0000 UTC
