The Cantina
Added 2024-07-12 15:27:21 +0000 UTCCompletely newly sculpted from the ground up, this 1/12 scale Cantina measures 17” wide by 9” tall. I plan to build out additional parts to the cantina soon.
I recommend printing the back archway with 15% infill, and printing the silver awning at 10% to keep it lighter.
The chairs will work best at the smallest layer height possible. The pipes should slide onto the poles and 'twist' into place, but a dab of glue will secure them.
Table lights: https://amzn.to/3S4l7SM
Chrome filament for pipes/greebles: https://amzn.to/3zFwF8y
Piping for hookas: https://amzn.to/3xTIXtv
Bambu filaments used: Silver, matte ash gray, matte latte brown, and matte ivory white, copper, bronze, matte dark red/marine blue (for bar stripes)
July 27 2024 UPDATE: I split the white/silver bar-top files into separate files for those without AMS printing. Redownload the .zip below. I had to fix the BarTopMiddle split file, please redownload!
Comments
Good afternoon and hope you are well. I am working on this project and not finding the top of the chairs in the Chairs and Tables folder. I see a 3d object file but no stl or 3mf.
Wayne Gilley
2025-01-26 22:01:54 +0000 UTCfor some reason cura doesn't let me slice the arch door? Am i doing something wrong?
Mason Wride
2024-12-27 00:07:26 +0000 UTCit's called cantina_body_24 in the Hookah folder.
Landspeeder Luke
2024-09-14 22:35:41 +0000 UTCStarting to print the small stuff and I dont see a file for the hookah mouth piece
Magna Defender
2024-09-13 05:10:40 +0000 UTCGoing to start working on this tonight. Your stuff is top notch!
R. J. Clark
2024-08-11 20:17:20 +0000 UTCarchway and the bar doesnt fit together
Reuben Delgado
2024-08-10 12:31:51 +0000 UTCThank you, i see your note now... Looks better. I Probably should do more than 10% lightning on those. Still didn't look as smooth as yours.
Pistol Pete
2024-08-06 22:30:11 +0000 UTCUse a really small layer height like .08
Landspeeder Luke
2024-08-06 03:22:34 +0000 UTCLuke is there a trick to printing the stools. the tops look like a topographic map where yours look smooth? Thanks
Pistol Pete
2024-08-06 02:50:02 +0000 UTCGotcha, thank you!
Michael Galuppo
2024-07-29 00:44:16 +0000 UTCTape for the stripes. For the doorway arch it’s elevated slightly
Landspeeder Luke
2024-07-28 21:23:53 +0000 UTCAny tips on painting the red and blue on the bar top and arch?
Michael Galuppo
2024-07-28 21:23:24 +0000 UTCThanks for splitting the bar, but I was talking about beigetopmiddle in the Beige Outer Awning folder.
Greg Thompson
2024-07-26 20:31:52 +0000 UTCDang fast response. thank you!
teamcesar
2024-07-25 22:01:52 +0000 UTCYes, it just means it’s one file that you would paint in the slicer. Make it silver, and then just click with the paint can on the top of the bar to make it white.
Landspeeder Luke
2024-07-25 22:00:46 +0000 UTCSuch a great upgrade! Question about the bar. I see the "Bar Top for AMS" folder, but it seems the files in them are only 1 color. Is this deliberate? Thanks!
teamcesar
2024-07-25 22:00:10 +0000 UTCOh shoot thanks for the heads up
Landspeeder Luke
2024-07-20 22:33:30 +0000 UTCThe Light up tables are so cool. You can even use as tea lights. Heads up if you're buying the lights from the Amazon link, each light already comes with 3x LR41 batteries. I bought an extra pack of LR44's listed in the PDF and they're way bigger than the lights and didn't seem to need. @LandspeederLuke, you may want to update your PDF with the correct battery.
Brian Corpuz
2024-07-20 22:17:06 +0000 UTCThank you! I have a Creality K1 using hyper pla. Thank you!
Greg Thompson
2024-07-20 15:51:18 +0000 UTCHey Greg! I can upload a split version. What printer are you using?
Landspeeder Luke
2024-07-20 15:48:19 +0000 UTCHow are people printing the beige outer awning? It doesn’t fit the print bed unless I flip it like a standing arch, but then the print failed at the top curve. Turn on supports and try again?
Greg Thompson
2024-07-20 14:45:28 +0000 UTCNevermind my question on the LEDs - the video on the product page shows they're quite large - I think definitely too large for a 1/18 size print. Are you familiar with any similar product for 1/18 by any chance?
Remi
2024-07-13 09:52:34 +0000 UTCLuke, I have a stupid couple of questions. a) How small are the LEDs which you recommend? Would they still fit if I print the tables in 1/18 scale? b) For the hookas piping, which diameter do you suggest I look for (again 1/18)?
Remi
2024-07-13 09:48:52 +0000 UTCWell said
Remi
2024-07-13 06:44:14 +0000 UTCIt’s that simple, yet I forgot. Thanks, Luke!
Shakes The Clone
2024-07-13 03:28:45 +0000 UTCI knew there would be a better option to the TVC Haslab. My patience and lack of FOMO is being rewarded.
Scott Sevegny
2024-07-13 01:54:27 +0000 UTCThanks Luke.
Darth_Chimera
2024-07-12 23:18:56 +0000 UTC3.75/6 = 62%
Landspeeder Luke
2024-07-12 22:46:30 +0000 UTCTamiya masking tape has a great reputation with the scale modelers.
Shakes The Clone
2024-07-12 22:31:36 +0000 UTCWhat’s the math for converting 6” to that scale? I sent it to myself in an email in case I ever forgot it, which I have. Now I can’t find the email. 😆
Shakes The Clone
2024-07-12 22:29:27 +0000 UTC💯
Shakes The Clone
2024-07-12 21:20:45 +0000 UTCFantastic, thank you!!! BTW was there a stencil for painting the red & blue?
Luis Velez
2024-07-12 21:09:06 +0000 UTCThis is awesome! Can’t wait to add the alcoves too!
Greg Thompson
2024-07-12 19:17:13 +0000 UTCOh okay thank you. You’re the best as always!!
Jon Chrisman
2024-07-12 17:23:01 +0000 UTCI'm just thankful he's doing it for this one, if you aren't happy with the many many amazing designs he's released then I don't know what to tell you. I consider this a positive space, you can keep your negativity elsewhere.
Bill Fryer
2024-07-12 16:56:00 +0000 UTCi been really wanting 3mf files set up also -- like - i was crazy excited for the cockpit to drop and then i unzip the file and see the mess inside - like man, cmon - please bro - you know a majority of the people here are using bambu now and going foward it will stay like that - so being on here, i hope you consider that - i kept my sub going for MONTHS now without downloading or printing any of your files - and I do that to support you and keep you going - but plz, 3mf bro - if not i'm only going to be more vocal about this in the future and my voice is growing loud as the days go on
Block BB
2024-07-12 16:51:44 +0000 UTCNo extra tier figures?! This is underwhelming... /sarcasm off 😊 Amazing job! I cannot wait to print it in 1/18!
Remi
2024-07-12 16:21:52 +0000 UTC3MF Files?!? Thank you Luke!!!
Bill Fryer
2024-07-12 16:06:25 +0000 UTCAmazing!
Ellie Jay
2024-07-12 16:03:37 +0000 UTCThe hype is real. Thank you so much for this!
Shane Hawkins
2024-07-12 15:38:03 +0000 UTCI recommend starting from scratch, this new one has a lot more detail and is more accurate.
Landspeeder Luke
2024-07-12 15:37:35 +0000 UTCWow! I already have the bar printed- do you think I could just print the arch pieces to go with it or is a reprint of the bar itself recommended?
Greg Thompson
2024-07-12 15:36:53 +0000 UTCI didn't want to be limited by the size of that one, I think you'll like this a lot better
Landspeeder Luke
2024-07-12 15:33:29 +0000 UTCDude you are absolutely killing it. This is so great.
CosmicForce3DPrints
2024-07-12 15:33:14 +0000 UTCOh just because I already have that set so I had thought I could just print the other pieces and fit it together
Jon Chrisman
2024-07-12 15:32:56 +0000 UTCNo but why would you want it to?
Landspeeder Luke
2024-07-12 15:31:00 +0000 UTCWill this work with the cantina bar set that hasbro released a few years ?
Jon Chrisman
2024-07-12 15:30:27 +0000 UTCYou never cease to amaze sir.
Steven Parrish
2024-07-12 15:29:06 +0000 UTC
