*Files can be found in the Member Depot*
I saw a few of these going around so I thought I would put my hand in and give one a go, all of the carving was freehand, I didn't want it to look too rigid and square, more how metal looks when its a bit worn out.
I have put no battle damage on this, if you guys want o...
Just getting back to polishing off Hero Chess pieces and boards still guys, Level 3 's MK3 Ironman suit was pretty hectic and took some serious hours but thats pretty much done now.
Had this one on the back burner for a while, once again utilizing the great Luke head from Toshi_TNE. I had done a Rancor vs Facehugger which was looking like...
*Files can be found in the Member Depot*
16 Feb 2019 - V2 Uploaded
* Increased sword thickness x 4
* Straightened left wrist to lose that awkward hand pose holding the sword section
* Changed angle of forehead centrepiece to join nose bridge, less support around face required (po...
*Files can be found in the Member Depot*
This is a 3D scan that I cleaned, made solid and fixed up for printing in the process of then casting and creating chewbacca faceplates. I have seen the fibreglass versions floating around the web selling for megabucks, so I figured you guys might be able to make something off this.
<...
*Files can be found in the Member Depot*
These helmets:
1. Please ignore the word "Iron" in the filenames. I purely was tired (and being lazy ) and selected an old ironman part when exporting the new part for the helmet and forgot to take the word "Iron" out of the filename, to save time and hassle I am just go...
*Files can be found in the Member Depot*
Full Suit added!
Helmet is in a separate zip below.
Parts are uncut, I'll leave that up to you and your machine sizes.
After April all downloads will be from the new site and all new subscribers will only have access to the files each month, so if they miss out, they miss...
*Files can be found in the Member Depot*
Something a little different, with my kids becoming Anime nuts I've been watching a bit more than I usually would have. I've had some requests for this one, its a pretty easy print, the halves are not dead flat tho if you decide to print it in the 2 pieces.
This was designed with ...
*Files can be found in the Member Depot*
*Note. The detailing on the handle /grip of the sword is not meant to be the final detail. The ridges are there to assist in keeping whatever you wind the handle with in place while you are winding it by letting it fall into the grooves every couple mm. The 'official' sword is bound with...
2019-01-29 13:06:50 +0000 UTC View Post
*Files can be found in the Member Depot*
I held off on making this one for a while, but now that its done the flame trooper costume only needs one more part and thats the actual flame thrower which I will do soon.
This is not a hard print, there is just over 50 parts to print, but there are a couple of things to note...
I remember seeing a meme one day where someone had taken two photos and mashed them together to make a VW inspired walker, I thought hmmm I should make that one day.
The feet were causing me grief when removing them from the bed so there is a very small disc base under it thats not in the render above to make it a pretty simply print i...
*Files can be found in the Member Depot*
Pretty simple one, I didn't really bother with connecting tabs as the shape itself makes it pretty easy to get sections aligned. I use 2 part epoxy myself... something that gives me a little time to line things up but only requires you hold it for about 30 seconds-1 minute for it to set hard enough...
An intermediate helmet to build, it has a few parts (have uploaded uncut also) I didin't smooth it out too much, I sort of left it looking like battered steel, more flat edges rather than sharp etc, it should print out pretty clean.
It is scaled for a normal head - if you want to go full on massive scale like it is in the show you will ne...
Thank you for your patience everyone!
Just for the new members and the ones who have not had messages replied to, I had to take a bit of an emergency trip for a week down the coast to hospital with the family to see my father in law who has been through 3 weeks of surgeries for facial cancer (all over xmas, new years .. :/) condition...
2019-01-10 05:03:35 +0000 UTC View Post
*Files can be found in the Member Depot*
This one has been requested by quite a few people lately and I'm trying to get as many models out before end of month as I can, so here she is!
It is cut dead flat under the chin so it can be printed pretty easy with minimal support and the right way up - and it juuuust fits in an...
Once today is over I can get back to it, but today is a day for family. I hope everyone has a Merry Christmas and Santa brings you something neat - I expect pics!
I wish the best health and happiness for you and your families, treasure the time you have. We are not so lucky this Christmas with my father in law currently in the ICU un...
2018-12-24 21:25:05 +0000 UTC View Post
Level3
Just before I was about to upload the cod, I thought hang on.. what happens when you need to take a leak.. (which as I keep approaching 45 seems to be more frequent lol..)
solution... Magnetic crotch!
Have made all adjustments just re-uploading now. Arms after that, Torso I feel needs another hour to be more print worthy (...
2018-12-18 22:37:41 +0000 UTC View PostLol sorry guys, end of year stress showing it's signs... i've got a fair bit to get uploaded, just bare with me.. I looked at the date and wtf its the 29th?? (well it is here in AU...) I swear I thought it was more like the 25th...
Anyway, posts incoming tomorrow, may not have the torso for MK3 but rest of it will be (Arc ...
Heya!
I wanted to let you know of a page that one your fellow patrons Shaun Hadley has setup on facebook. Since Patreons App is pretty hopeless at well... everything, Shaun thought it might be a good idea to have a place purely to show off your prints from the models here. I want to take a second to thank Shaun for setting this up, It's one ...
**UPDATE**
Locked post issue resolved with this one, all should be seeing it now.
Files attached /assembly for the cut version.
Several options available, please see the images also attached.
I've given you a few options to work with, all greebles can be found in the OP3 contents zip file, like the c...
*Files Can be found on the members depot*
No assembly instructions really needed, contents.png below shows all options in the .zip.
I am doing a number of batcowls, Telltale series was up first, second is my take on the batman beyond cowl. The mouth piece is optional, as is a smooth fronted mouthpiece. The main section is supplied ...
*Files can be found in the Member Depot*
No denial, I saw someone on the RPF make one from fiberglass and it looked so cool, couldn't help making one. That and a few people have asked for some LOTR and other types of helmets, this is one of a few coming. Conan sword just needed some touching up, im being a bit nit picky w...
2018-11-17 02:38:18 +0000 UTC View Post
Some people say they are here for a good time, not a long time.. Stan Lee was so cool he did both. At 95 although very sad of his passing, he lived a full life and left his mark on the world which will last several lifetimes over through the characters he created.
I received a book when I was 9 years old called "How to draw the marvel ...
Heya!
I was going to release my conan sword last month, but I knew I had the one in the picture above coming in the mail so I wanted to hold off till it came and I could get proper measurements from it and study it in a bit more detail.
Luckily I sculpted it pretty close to this before hand, so there is not much to do to have the swo...
Fixed...
I have removed 2 files from the main .Zip in the shins and feet folder.
Mid_LeftFoot_P1 and MidRightfoot_P1
The updated versions are in the same folder. I will upload the assembly instructions in about 10 mins to the same folder.
Pls see attached pic as to what the issue was and if you have already printed th...
Before anything else, Level 1 and 2 Patrons you are getting a great deal of rewards this month, I have just been a little caught up on this Level 3 reward last month for longer than I wanted but it really was a model that required 100% attention. I could not drop it, come back, drop it, come back .. because of the sheer amount of measurements...
2018-11-10 04:04:57 +0000 UTC View Post
Update 15/2/2019
Uncut Helmet pieces added
Files are store on the Archive:
Update 6/2/2019
Shoulders, biceps, forearms, hands added...
2018-11-09 07:46:10 +0000 UTC View Post
I didn't want to post until I'd fixed the major stuff up I made, and that was part of the inside of the foot being far too narrow for any adult foot. Unfortunately it was in the middle section which had alot of things around it, so I could not merely widen the part I wanted to without completely re-doing half the foot, this took me another 3-4 days...
2018-11-08 17:26:51 +0000 UTC View Post
Thank you for your patience over the last week, things have settled down and I can start getting these models out, it's going to be a massive month for all tiers. So much it would take me too long to list it all right now I want to get the time right now put into uploading this stuff.
New Hero chess pieces, ironman mk3 , new helmets.. conans...
Hey all (and welcome to the new patrons! busy weekend here for us)
As I mentioned earlier in the week I have to go away for a couple of days (just over the weekend) I just couldn't get what I wanted finished by today, and I literally have to get in the car in an hour and drive for 10 and no matter what I did the clock just worked against me...
Hi all,
I have been extremely busy working on this this and last month. I also have a few things going on here at home healthwise (not me) but its proving to be a difficult month so far in alot of aspects, but we'll power through.
The MK3 entire suit is completed. Right now it could be a static prop, but I'm most of the way through al...