I have just finished and uploaded the Dead Space Helmet assembly drawing so now its onto the next projects. I will add the previous models on the poll that I didnt do as well as adding more. Take a look, see what you think and cast your vote, It'll be great to see what you guys want.
2021-08-16 20:10:24 +0000 UTC View Post
Just a quick one and as it says about the Plasma Cutter is done, cut up and the drawing is all done. The files are attached below and also in the dropbox folders.
I have decided to do the level 2 helmet from the game as it looks the coolest and doesnt look like it has a load of unnecessary geometry on it but still looks practical in ...
2021-08-06 22:22:24 +0000 UTC View Post
This took longer than expected due to not having a lot of time recently at the PC but its finally done. I have attached the STL's and I will be working on the drawing next. I was not able to incorporate a working trigger as the frame in that area was just too thin and small that I didn't want to weaken it anymore for the purpose of adding that s...
2021-06-30 13:58:37 +0000 UTC View Post
Both Iron Mans Arc Reactor and Mals Pistol from Firefly are both complete along with their drawings and availble to download both here and on Dropbox.
Following the next model from the poll, I will now be moving onto Hellboys Good Samaritan Pistol
2021-05-09 19:57:21 +0000 UTC View Post
Since the posting of the poll, I've been keeping a watchful eye on what you guys have been interested in and Mals Pistol from Firefly was the highest voted so I started on it a few days ago. I have only done one side of the pistol so far and just mirrored it for this render but it does look quite good so far.
As for the other projects on t...
2021-04-18 08:37:31 +0000 UTC View PostSo below is my current wish list of props I have on my whiteboard that I add to when I want get inspiration for another project. They are in no particular order and range from quite simple to complex projects so take a look and see what you think and hopefully there is something on there for everyone.
The only one that wont stand out to ma...
2021-04-15 12:25:40 +0000 UTC View Post
Hello all, sorry for not putting a post out in so long but I assume that most of you follow me on at least one of the social media platform that I post on to see my progress as I go.
The whole time I have been diligently working away on the Mummy Book of the Dead which is now complete except from a working key. I have fully modelled the ke...
2021-04-11 22:06:05 +0000 UTC View Post
So after much toil the static Silverhand Custom from Cyberpunk 2077 is complete and ready to download from Dropbox. I say static as I'm working on a version of is that is semi functional as in the barrel spins when the trigger is fired. Its going to be something I havent tried before and hopefull it'll work as it will be so much cooler. 2021-01-17 13:38:46 +0000 UTC View Post
I've seen a trend recently that whether its spread via word of mouth or whether it’s just a coincidence but I've had at least 20 of so people in the last 3 months join my Patreon and then instantly cancel. I would assume they are doing it to get the Dropbox link and then not pay for it. In the past I haven’t bothered changing the Dropbox loc...
2020-10-12 20:46:57 +0000 UTC View Post
Hi Guys, I apologize for taking so long on making a post but I try to keep my social media channels up-to-date and I sometime forget that not all of your would see those posts as well.
Shown in the images above I have complete the backpack, chest and biceps of the T60 so just have the forearms and hands left. The plan is to have a model ca...
2020-09-17 20:15:22 +0000 UTC View Post
After 4100 features the Doom Eternal Super Shotgun is complete. The image above is a bit of a side by side of the Doom 2016 super shotgun to give you an idea of the size difference and its a thicc boi. As there is a load more detail work all over the weapon I would emphasize that having a machine that can print with a 0.25mm nozzle to atleast 0....
2020-06-16 19:47:13 +0000 UTC View Post
I have finished the Star Wars Pit Droid and the files are available below and in the dropbox folder. I really wanted to have it as a fully foldable replica but looking at the joints from the animations of them unfolding they are just not possible as they are just to small to be printed and strong enough to survive even one use. But, the ar...
2020-04-05 21:14:29 +0000 UTC View Post
After many hours within Blender I've now completed all 4 player tokens for the Jumanji board and they are with the rest of the STL's to download. For the Tinkerer tier supporters, the Blender files are with the rest of the CAD files.
As I want this build to be more epic than before I'm looking to mount a screen inside running a rasberry pi...
2020-03-08 01:07:38 +0000 UTC View Post
Though it feels like a long time I've finished the thighs of the T60 power armour and they are in the dropbox folders.
I've now started on the legs of the pit droid and its going well. It shouldn't be too long for me to finish but the only thing that will take time is how to get the joints to move so it collapses.
2020-02-16 17:47:23 +0000 UTC
View Post
The caption image shows my current progress on the front inlay of the jumanji and hopefully it's noticeable then I'm starting to improve on Blender. I'm adding all the small hand-carved details so that its not just flat surfaces and I've taken a slice off it to test print on the resin printer to see how good these details come out. Once I've add...
2020-01-07 22:23:39 +0000 UTC View PostI've uploaded the shin and foot armour of the Fallout 4 T60 power armour. Both the STL's and CAD files for these are in the dropbox folders as they are too big to put on as attachments to this post.
2019-12-21 16:26:05 +0000 UTC View Post
As you can see from the image above the front is starting to actually look like the board game box. I'm now working on the scenery in the top portion and after that I will move onto the portrait pieces in each of the corners. For this model I won't be able to add the very fine detail such as all of the ribbing on the leaves, the leaves on the tr...
2019-11-12 18:09:13 +0000 UTC View Post
It's taken some time to get some of the latest project finished as they've all required moving parts but I've finally done it. I have now uploaded The Judge Dredd Lawgiver Mk2 with the working trigger and bolt and the Doom Super Shotgun. They don't needed three to four different prints as sometimes moving holes one or two millimetres or just tes...
2019-10-04 18:29:08 +0000 UTC View Post
Even though I am still progressing with the T60 build, which is starting to be a bit of a pain working with so many surfaces, I am still progress with other stuff on the side as I find it quite boring to just to stick to one project. This has been my current lunch break project, the Doom Super Shotgun. I have wanted to do this for some time and ...
2019-09-04 20:14:58 +0000 UTC View Post
I'm currently replaying Bioshock which may lead all the way to infinite and I've found how and have now extracted all the meshes from all three games. This makes it a lot easier to create models as you have something to get all your setting out the basic model shape and ensures I don't have to go back and fix/adjust any parts of the model that a...
2019-08-11 20:05:02 +0000 UTC View Post
For those who follow my social media profiles you would have seen that I've said I've had some issues with the base mesh files I use to get the scale of Fallout game item right which has really hindered the progress of the T60. I have only recently been able to get back too it as the VAR didn't has a solution for it. So in that mean time I...
2019-07-28 17:09:01 +0000 UTC View Post
As much as some of the geometry has been a real pain this is my progress so far with the T60 Power Armour. My plan is to roughly model the whole armour so its accurate and then go back and adjust what need to adjusted so that the armour can actually move correctly and not just cause constant interference.
2019-07-07 19:14:35 +0000 UTC
View Post
The Holy shotgun is complete and and I've printed most of the FDM parts and I'm making my way through the other parts I'm printing on the Anycubic Photon. The STL's are attached to this post and are also in the dropbox folder, the CAD files are also in there respective folder.
For the layout of the files, I have split them up so as to redu...
2019-06-23 17:03:27 +0000 UTC View Post
After E3's EA play gameplay of Fallen Order I really wanted to model the new BD-1 (buddy) so spent saturday night and early into sunday morning completing the model with some time over the last couple of day to fine tune it.
The exploded vie...
2019-06-13 19:47:41 +0000 UTC View PostBelow is my compiled list of what I would want to build next, everything on this is list is what I want to do at some point but obviously I need to start somewhere. Some of these are from the old poll as they are all still relevant. I know it only gives you one vote but please say in the comments if you also like another option
Additionall...
2019-05-31 22:13:10 +0000 UTC View Post
After having a long bank holiday weekend of a lot of modelling and not much sleep I have complete the T60b helmet along with the BOM and drawing needed for the build. I have attached the STLs and drawings in this post but the STL and CAD files are accessible in their respective dropbox folders.
As for the Constantine Holy Shotgun (shown be...
2019-05-27 15:20:26 +0000 UTC View Post
I have really enjoyed modelling the fine details on the Constantine shotgun as it will look so good printed. If you follow me on social media you would have seen my recent post where I test printed a FDM and DLP version of the detailed disc in the images above, the prints are below (FDM on left, DLP on right).
2019-05-14 21:07:34 +0000 UTC
View Post
Attached are both the files and drawings for the Apex Legends Hemlock and Futurama F ray. The Hemlock I've previously been working on but the F-ray (shown below) is just something I thought i would do this week as I've been watching Futurama while modeling stuff. It was a fun one to do since it was simple and it felt like I did it so quickly com...
2019-04-27 06:33:21 +0000 UTC View Post
It's taken some time but a lot of the large parts are printed and I'm happy to say the M41A pulse rifle is complete. Attached below are the STL's. I have now started on the accompanying drawings to help with everyone's build. Here a quick view below. For the Tinkerer tier supporters, the CAD models are in the Dropbox folder. As for the Bui...
2019-04-01 21:02:59 +0000 UTC View Post
I've had a few of you guys asking for some build help on some of my older builds which didn't create an drawings for. As the top image shows, one of the drawings is the NCR ranger helmet which I do admit could be hard to follow without something like this. I have also done the Fallout 4 Laser pistol as I know the reload mechanism could be a litt...
2019-02-24 19:56:37 +0000 UTC View Post