Hey there, wonderful people!
I think I spent longer turning this camera around in my hands and staring at it than I did actually implementing the housing. There was a lot of frowning and visualising how things might go together, which is how a lot of these things start.
The approach I'd taken with the other Raspberry Pi cameras...
2020-07-26 15:31:21 +0000 UTC View Post
I can't stay away from geometric shapes!
You may recall the cube, dodecahedron, and others that went together with interior brackets and exterior bolts. Well, those weren't big enough! This polyhedron uses the same hexagonal and pentagonal pieces bolted together to make a truncated icosahedron, which is probably most fam...
2020-07-20 07:55:23 +0000 UTC View Post
Who knew there were so many cameras for the Raspberry Pi! The Sentinel case included a mount for the classic RPi camera, but there are a few more that are worthy of supporting.
First up, the common IR camera, pictured above. This one is probably the most fun from a pure aesthetics point of view, since it undeniably looks...
2020-07-20 07:46:03 +0000 UTC View Post
Hey there wonderful people!
By popular demand, the branch tube is now available in a different outer texture! This time it's a knurled finish, and being a relatively fine pattern it won't be obvious if the patterns don't precisely sync up between parts. Also, the texture feels nice :)
There are a couple of longer individu...
2020-07-20 07:39:14 +0000 UTC View Post
Hey there, wonderful people!
The Jupiter Box was inspired in a way by the Operator Box in that I really like the way the screw closure locks it securely. The screw part on that container is a separately printed part, though, and I wondered if I could come up with a similarly-secure mechanism that was completely print-in-place. ...
2020-07-14 15:25:36 +0000 UTC View Post
Howdy, amazing people! This is a long post! :D
The way ideas and designs develop is something that really intrigues me, even when I'm in the middle of it! Yep, it's another Raspberry Pi case, and while this one is somewhat more ambitious than the other recent ones it couldn't have come about without them paving the way (and pro...
2020-07-08 17:06:34 +0000 UTC View Post
Howdy, wonderful people!
I can't deny it, I love assembling things! It's the reason we have designs such as the bolted polyhedra and the epicyclic kaleidocycle - I really like putting stuff together. And this storage tube/caddy/thing very much comes from the same place. These are big, substantial elements, though, no litt...
2020-07-08 17:06:23 +0000 UTC View Post
Hey there, wonderful people!
Another month zooms by! And in between the things that got posted, some other stuff veered off in other directions, evolved into other forms, or went crashing off into the undergrowth. Join me on this salvage expedition...
Connecting Drawers: So Close, but Not Quite There
<... 2020-07-02 14:57:54 +0000 UTC View Post
"Why doesn't the Verticality Box stack? It looks like it would stack!"
And now it does!
I have to agree, that inset lid looks very nice and stable, and it seemed a shame that the box wouldn't just stack in there. But, that lid... I like that lid! As usual, I'm driven by shape and proportions, and I just really like the wa...
2020-07-01 14:32:36 +0000 UTC View Post
Howdy, always-wonderful people!
By popular demand, here's a version of the Pi4B with a hexagonal pattern! And, by popular demand, I mean someone suggested it and hexagons are the best, so there you go. Note that there's no camera cable slot in the hex version - best to stick with the regular Breezy case if you need that feature...
2020-07-01 13:08:30 +0000 UTC View Post
Hey there, wonderful people!
The compressor box is just the right size for game cards, and it seems like people have a lot of those, so here's a taller version!
This taller version is almost twice as tall (80mm vs 152mm externally, if I recall correctly), but the internal capacity will be more than double once we consider the o...
2020-06-27 16:00:52 +0000 UTC View Post
Hi, wonderful people!
Apparently Pi4Bs are a popular thing right now! And one significant difference between it and the previous generations is that a cooling fan is no longer really optional. So, I had a bunch of requests asking for a spot to mount a 30mm fan. Usually, you'd just add a spot to take some bolts, but where'...
2020-06-27 15:40:25 +0000 UTC View PostHowdy, my favourite people in the world!
I have some actual printing stuff to post, but before we get to that, let's talk about taxes!
Sales tax! I'm not sure there's a more dry topic than that. However, Patreon is quite insistent that I write something about it, so here we are! You've probably already had emails ab...
2020-06-27 15:12:41 +0000 UTC View Post![Compressor [Card] Box!](https://img5.samukata.com/storage/8/eu/dk/4e9b88-019e9051-ebe1-7f3e-9f50-81500f561368.jpg)
A box with variable volume! This idea had been on my mind for ages, but I'd invariably ended up going in some other direction when sketching it out - but no longer! The concept was relatively simple - a lid with a screw mechanism to lower and secure it at any arbitrary point.
Funnily enough, the box body itself remained almost ...
2020-06-21 14:58:08 +0000 UTC View Post
Hey there, wonderful people!
3D printing never ceases to get me enthused. There really is an endless sea of possibilities out there to explore. This started off with thoughts of chainmail. Well, kind of. Lets call it linked, repeating parts. NASA did some awesome chainmail-ish stuff a while back, and I started...
2020-06-21 14:15:10 +0000 UTC View Post
Howdy, wonderful people!
I was clearly channelling my favourite science fiction design tropes while I put this one together! It's all fins, slabs and mesh with oversized moving parts for a super-industrial style. Think spaceship access panels and service ducts, supply crates and emergency escape kits...2020-06-15 11:36:29 +0000 UTC
View Post
Hey there wonderful people!
I get a ton of great feedback on designs, especially along the lines of "hey, it would be really cool if..." And that's what the models in this post are all about. Some things had a heap of requests (Pi4B case, I'm looking at you!), and some much less so but seemed like a fun idea... let's hav...
2020-06-13 16:18:58 +0000 UTC View Post
The vertical slots just somehow said "radiator" to me, so Radiator Box it is.
Howdy, wonderful people! Somehow, there are still more approaches to hinged lids out there - like this one! So, what's so different here?
First, the obvious part: on this box the shape of the lid is almost completely arbitrary - it's curved on b...
2020-06-08 14:01:47 +0000 UTC View Post
Hey there, wonderful people!
The pile of SD cards sitting under my monitor almost resembled some kind of order, in as much as the cards were at least in one place. But at some point it occurred to me that life could be better. And now it is! So let's have a look at this design.
The most obvious thing is that ...
2020-06-04 16:28:11 +0000 UTC View Post
Howdy, wonderful people! Yep, pliers, tremendously useful when developing designs, especially ones with moving parts. Test prints take time, so when I wonder "hey, what if I only had two cogs there, rather than three?" out come the pliers, and hopefully I get some insights without waiting for yet another print to finish.
Hey there wonderful people!
It's probably not a surprise that I made a hinged case for a Raspberry Pi Zero, but this was completely unplanned. The thing is, I had a Pi Zero W arrive that I'd ordered aaaaages ago and had largely forgotten was on the way, so I sat down and made an enclosure for it. I have of course made enclosure...
2020-05-29 12:48:57 +0000 UTC View Post
Howdy, wonderful people!
I think this might be my new favourite box, at least for a little while :) So fidgety!
As is fairly apparent, this is a variation on the Machine Canister, except (a) it's rectangular, and (b) it has only one latching pin. And, it's a bit smaller than its rather large sibling!
2020-05-23 12:52:14 +0000 UTC
View Post
Hey there, wonderful people! By popular demand, I've made a few variations to the Hinged Pi3B case to suit a few more use cases. The SD card access slot is also bigger now, too, including on the original case, which now has a new version.
2020-05-20 12:43:35 +0000 UTC
View Post
Hey there wonderful people!
I had a question recently as to whether my Pi Zero cases could be adjusted to fit a larger sized board, and that made me wonder why I'd never made such a thing anyway. I looked at the sadly neglected Pi sitting just nearby and got to work.
Now, there are a million cases out there, but I had two parti...
2020-05-17 14:55:58 +0000 UTC View Post
Single! Double! Triple!
Hello, hello, wonderful people! Well, a lot of people said yes to taller two-piece machine canisters, so taller canisters we have!
While the height of these things is fairly arbitrary, I did want to try to tie together the different heights so that they'd look relatively sensible again...
2020-05-17 14:36:04 +0000 UTC View Post
Hey there wonderful people! I stopped twirling cogs on the Machine Canister long enough to do up this two-piece version. And it does actually have some interesting design considerations that differ from the original, hinged version.
At first glance, I figured hey, I'll just remove the hinges and tidy things up, and all will be ...
2020-05-14 16:04:10 +0000 UTC View Post
Hey there, wonderful people! Welcome back to the land of gears!
Here we have a large hexagonal container, with a hinged lid latched closed by a trio of cogs driven by one central handle. As usual, it's all print-in-place and requires no supports!
2020-05-12 12:11:03 +0000 UTC
View Post
Hey there, wonderful people!
I really like designs that invite filament switching mid-print for interesting colour effects, but generally speaking those tend to just result in a layered look. That's not a bad thing, but sometimes you want something more complicated. Generally, this results in designing assemblies, but I wondere...
2020-05-07 15:38:52 +0000 UTC View Post
Howdy, wonderful people!
As always, scrolling back to the start of the month feels like looking back to a long time ago. The side-drive geared box was April? Crazy! It feels like so much longer ago!
The Lost Flask!
Now, there were a few "flask" models posted this month, but there was on...
2020-05-01 14:39:03 +0000 UTC View Post
Hey there wonderful people! The end of April already - crazy! Now, this isn't actually my end-of-month retrospective, it's a model! That said, the retrospective post will talk through the evolution of this design, with photos of several other versions that preceded this one!
But first, let's talk about what we have here!<...
2020-04-30 16:59:40 +0000 UTC View Post